Work CA NEO 40i User Manual - Pb-5
NEOi A Series, Anti-clip system (Explanation)
The
anti-clip system. If the 1V nominal input level is exceeded,
the anti-clip circuit will operate, attenuating the signal to prevent a clipped signal which
could cause the amplifier to distort. Low distortion electronic circuitry is used to maintain
the clarity of the input signal.
There are no user controls for the anti-clip circuit. If the level cannot be heard to increase
when the input level is increased, then the anti-clip circuit is operating, and the input level
or the VOLUME control should be decreased. Note that protection is not provided for
excessively high input levels (above 4V).
NEOi A series features an
1
2
3
4
5
6
7
8
1
Rear wall mounting part
Front threaded part with studded socket
Rotary knurled ring
Threaded Ball
M8 nut
Rear threaded insert
(mounted to loudspeaker)
Screw eyelet for safety cable
( )
*
Self-tapping screw
2
3
4
5
6
7
8
PB-5
Wall-mount bracket
(included)
PAGE 7
User Manual NEOi Series
The NEOi series is rated to IP54 which means there is
ingress
protection.
The NEOi series is designed for both indoor and outdoor operation where it is protected
from direct exposure to water (e.g. under a canopy). The use of protection from water and
humidity for the connection terminals is highly recommended (e.g. sealant/mastic).
limited dust and water
( ) Safety cable not included
*