Work Pro PA 40/2 User Manual - Pa 40/2
PA 40/2 User Manual/Manual de uso Page 2
This symbol on the product or on its packaging indicates that this product
shall not be trated as household waste. Instead it shall be handed over to
the applicable collection point for the recycling of electrical an electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling
of this product. The recycling of amterials will help to conserve natural
resources. For more detailed information sabout recycling of this product,
please contact your local city office, your household waste disposal service
or the shop where you purchased the product.
Características
Funciones
1. Su diseño asegura una gran durabilidad
2. Salida con función de protección ante
Especificaciones
TIPO: Amplificador con mezclador incorporado
POTENCIA DE SALIDA: 40 W, menos de 3%THD.
a1KHz .
RESPUESTA DE FRECUENCIA: 150Hz-15KHz 3dB
ENTRADAS: MIC-1, MIC-2 (-42dB) 10k ohms/50k ohms.
AUX (-20dB) 10k Ohms/50k ohms
ALIMENTACION : AC 230 V o DC 12V
DIMENSIONES: 245 220 78mm
PESO: 3.2 kgs.
1. Interruptor de red
2. Control de volumen Mic-1
3. Control de volumen Mic-2
4. Volumen TAPE/AUX
5. Lámpara testigo de encendido
6. Entrada Mic-1
7. Entrada Mic-2
8. Entrada TAPE/AUX
PA 40/2
AMPLIFICADOR MEGAFONIA
cortocircuitos
PA 40/2 User Manual/Manual de uso Page 3
TYPICAL CONNECTION
BATTERY
Box speaker
Horn speaker
115V~
230V~
SP-SOCKET
5A
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : SHOCK HAZARD - DO NOT OPEN
RISK OF FIRE-REPLACE FUSE AS MARKED.
12V DC
AC IN
4 16
~
COM
Low Impedance Speaker Output: 4W
The low impedance 4 ohm terminal is provided for connection
of a few large-output speakers when constant-voltage speaker
system is unnecessary or in case the distance between the am-
plifier and the speakers is short enough (less than 50m).
It is requested that the total speaker load impedance be correctly
matched to the output impedance (4 ohm ) of the amplifier for
most efficient transfer of power.
Be sure that total impedance of speakers is above 4 ohms however,
do not riase amplifier output power to above the permissible input
power of speaker . If theamplifier output power should be raised
speakers would be damaged.
LOW IMPEDANCE OUTPUT
SPEAKERS
4-16 ohm
Total impedance
Total impedance
8 ohm
C L
above it, by mistake, the
8 ohm
16 ohm
8 ohm
4 ohm
16 ohm
Output Connection:
115V~
230V~
SP-SOCKET
5 A
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : SHOCK HAZARD - DO NOT OPEN
RISK OF FIRE-REPLACE FUSE AS MARKED.
12V DC
AC IN
4 16
~
COM
2
3
4
1
5
1. Portafusible
2. Selector AC
3. Conector de salida a altavoces
4. Terminales de entrada DC
5. Conector de alimentación IEC
2
6
1
3
7
4
8
5