User manual / instrucciones de usuario equipson, s.A. Www.Equipson.Es support@equipson.Es w4 pro dmx fuse(internal): f0.315a 250v power input: ac 230v~50hz fuse: f6.3a 250v 5x20mm output: 1.5a / channel, 6a / total. Power input: ac 220v~50hz fuse: f6.3a 250v 5x20mm output: 5a /channel, 20a / total. ...
W4 pro dmx 4 channels chaser/dimmer chaser/dimmer de 4 canales english version page 1 versión español página 12.
Contents features 1 technical specifications 11 general instructions 2 1. Overview 3 2. Operation guide 5 2.1 mode select 5 2.2 dmx mode 5 2.3 master mode 6 2.4 preset functions 7 2.5 chase direction 9 2.6 cross and normal dimmer 9 2.7 initialization 10 2.3.1 chase mode 6 2.3.2 channel dimmer 7 impr...
Features thank you for your purchase. This product features include: 4 channel chaser with 16 built-in programs 4 channel dmx dimmer pack with 4 individual dmx addresses normal/cross dimmer forward/reverse chasing direction fade time control preheat function manual override built-in microphone for m...
Do not dismantle or modify the unit. Packaging material (plastic bags, polystyrene foam, nails, etc.) must not be left within children's reach, as it can be dangerous. After having removed the packaging check that the unit is not damaged in any way. If in doubt, don't use it and contact an authorize...
Fuse(internal): f0.315a 250v power input: ac 230v~50hz fuse: f6.3a 250v 5x20mm output: 1.5a / channel, 6a / total. Power input: ac 220v~50hz fuse: f6.3a 250v 5x20mm output: 5a /channel, 20a / total. Ch1 ch3 ch4 ch2 fuses made in prc 24-005-0544 china n'ouvrez pas..Risque de choc electrique warning: ...
1. Overview 4. Power cable 1. Control board 3. Channel output 6. Dmx in 5. Dmx out 2. Channel fuse connect to an appropriate power outlet. Control this unit via these function buttons. This connector receives dmx signal. This connector sends dmx signal. F6.3a 250v 5x20mm 1.5 a/ch., total 6 a max.(ce...
In 2. Operation guide 2.1 mode select 2.2 dmx mode press and hold down f button first, tap the signal select button causing the segment display shows "in", dmx led lights indicating dmx mode is active, this unit serves as a 4 channel dmx dimmer pack. While holding down f button, tap signal select bu...
2. Operation guide 2.2 dmx mode 2. Tap the up/down button to select your desired dmx address from 001 to 512. 3. Once you've set the dmx address, tap the channel button a second time to store your setting into memory. 4. Continue steps 1-3 until you've set all 4 channels. 025 2.3 master mode 2.3.1 c...
Keep pressing f button, tap preset button several times to change functions between fade time/dimmer/preheat/speed/program. F00 fade time the segment display shows "f" followed by two numbers 00-99. Tap up/down button to set fade time from instant to 10 seconds. 2. Operation guide 2.3.2 channel dimm...
2. Operation guide 2.4 preset functions e25 master dimmer preheat program speed the segment display shows "d" followed by two numbers 00-ff. Tap up/down button to adjust intensity from fully off(00) to fully on(ff). The segment display shows "e" followed by two numbers 00-25. Tap up/down button to a...
2.5 chase direction 2.6 cross and normal dimmer 2. Operation guide keep pressing f button, tap button to select chase direction, the segment display shows "l--" or "r--". "l--" indicates the programs will chase from left to right, and "r--" indicates the programs will chase from right to left. Cao n...
2.7 initialization 2. Operation guide in press f, signal select and reset buttons at a time, this unit will initialize its memory, the segment display shows "888". Release all three buttons, this unit will return to default setting, the segment display shows "in", and manual dimmer led lights. Carac...
3. Technical specifications power input ..................................................... Ac 230v~50hz (ce) channel output .......................................... 1.5a/ch., total 6a (ce) channel fuse ................................................. F6.3a 250v 5x20mm dmx in/outt ................
