TABLE SAW 1700W
USER GUIDE
AFTER SALES SUPPORT
service.australia@einhell.com
WZTS 1700
09/2012
1300 922 271
Now you have purchased a WORKZONE® product
you can rest assured in the knowledge that as
well as your 3 year parts and labour guarantee
you have the added peace of mind of dedicated
helplines and web support.
Important: retain for future reference - please
read carefully.
WZTS_1700_AUS_SPK7.indb 1
21.05.12 15:54
Summary of WZTS 1700
Page 1
Table saw 1700w user guide after sales support service.Australia@einhell.Com wzts 1700 09/2012 1300 922 271 now you have purchased a workzone® product you can rest assured in the knowledge that as well as your 3 year parts and labour guarantee you have the added peace of mind of dedicated helplines ...
Page 2
2 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 congratulations! You have made an excellent choice with the purchase of this quality workzone® product. By doing so you now have the assurance and peace of mind which comes from purchasing a product that has been ma...
Page 3: Pg. 04
3 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 table of contents pg. 04 safety information pg. 15 items supplied pg. 16 layout pg. 18 instructions for use pg. 20 before starting the equipment pg. 28 operation pg. 40 data pg. 45 guarantee certificate wzts_1700_au...
Page 4
4 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 m caution! When using the equipment, a number of safety precautions must be ob- served to avoid injuries and damage. Please read the complete operating instructions and safety information with due care. Keep these o...
Page 5
5 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 protect yourself and your environment from risks and accidents by taking the appropriate precautionary measures. • do not look directly into the laser beam with the naked eye. • never look directly into the laser pa...
Page 6
6 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 • insert only batteries of the same type, do not use different types of batteries or used and new batteries together. • make sure that the equipment is switched off after use. • remove the batteries if the equipment...
Page 7
7 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 9. Wear safety goggles. - use a dust mask when working on dusty jobs. 10. Do not use the cable for purposes other than that for which it is designed - do not carry the tool by its cable and do not use the cable to p...
Page 8
8 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 19. Check the equipment for damage - before using the tool again, check the safety devices or any slightly damaged parts to ensure that they are in good working order. Check that the moving parts are working correct...
Page 9
9 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 • if necessary, wear suitable personal protection equipment. This could consist of: - ear-muffs to reduce the risk of damaging your hearing - a breathing mask to reduce the risk of inhaling hazardous dust - always w...
Page 10
10 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 • use only the transport devices to move the equipment. Never use the guards for handling or moving the equipment. Handle openings for transport purposes are on both sides of the saw housing. • while you are moving...
Page 11
11 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 • never use saw blades which do not comply with the data specified in these operating instructions. • it is imperative to make sure that all devices which cover the saw bla- de are in good working order. • importan...
Page 12
12 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 • operate the saw only with a suitable vacuum dust extraction system or a standard industrial vacuum cleaner. • never remove loose splinters, chips or jammed pieces of wood when the saw blade is running. • to recti...
Page 13
13 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 • before you actuate the on/off switch, make sure that the saw blade is correctly fitted and that the equipment‘s moving parts run smoothly. • follow the instructions for lubrication and changing tools. • keep hand...
Page 14
14 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 note the instructions for use! Caution! Risk of injury! Never reach into the running saw blade. Wear a breathing mask if dust is generated. Wear ear-muffs. Wear safety goggles. Wear safety gloves. Caution! Risk of ...
Page 15
15 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 2 items supplied • open the packaging and take out the equipment with care. • remove the packaging material and any packaging and/or transpor- tation braces (if present). • check to see if all the items are supplie...
Page 16
16 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 3 layout 1. Saw table 2. Saw blade guard 3. Extraction hose 4. Splitter 5. Saw blade 6. Table insert 7. Parallel stop 8. Hand wheel 9. Adjusting and locking grip 10. Base frame 11. On/off switch 12. Guide rail 13. ...
Page 17
17 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 1 2 3 1 2 3 4 5 6 7 11 12 13 14 15 8 9 10 2 3 4 5 16 17 8 11 9 wzts_1700_aus_spk7.Indb 17 21.05.12 15:54.
Page 18
18 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 4 instructions for use the table saw is designed for the slitting and cross-cutting (only with the cross stop) of all types of timber commensurate with the machine‘s size. The machine is not to be used for cutting ...
Page 19
19 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 even when the equipment is used as prescribed it is still impossible to eliminate certain residual risk factors. The following hazards may arise in connection with the equipment‘s construction and design: • contact...
Page 20
20 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 5 before starting the equipment • before you connect the equipment to the power supply make sure that the data on the rating plate are identical to the supply voltage. • only ever connect the equipment to a properl...
Page 21
21 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 5.1 assembling the base frame (fig. 4-9) • turn the saw upside down and place it on the floor. • use hex screws (c) and washers (a) to fasten the four legs (18) loosely to the saw (fig. 5). • now loosely screw the ...
Page 22
22 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 5 7 6 8 9 19 18 c a a b c a c b a b c 20 18 22 21 18 wzts_1700_aus_spk7.Indb 22 21.05.12 15:54.
Page 23
23 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 5.2 fitting the table width extension and length extension (fig. 10- 14) • loosely fasten the table width extension and length extension (14/15) to the saw table (1) using the allen screws (d) and the washers (e). ...
Page 24
24 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 5.3 fitting / removing the saw blade guard (fig. 2, 15-16) • when assembling the equipment for the first time, you must first fit and adjust the splitter. To do so, proceed as described in section 5.5. • place the ...
Page 25
25 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 15 16 17 18 4 2 24 25 2 24 3 2 6 26 6 wzts_1700_aus_spk7.Indb 25 21.05.12 15:55.
Page 26
26 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 5.5 adjusting the splitter (fig. 19-20) • caution! Pull out the power plug. • the setting of the saw blade has to be checked each time after chan- ging the saw blade. • set the blade (5) to max. Cutting depth, move...
Page 27
27 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 19 20 21 5 max. 3-5 mm 4 27 wzts_1700_aus_spk7.Indb 27 21.05.12 15:56.
Page 28
28 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 6 operation 6.1. On/off switch (fig. 22/item 11) • to turn the saw on, press the green button “i“. Wait for the blade to reach its maximum speed of rotation before commencing with the cut. • to turn the equipment o...
Page 29
29 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 6.4 parallel stop 6.4.1. Stop height (fig. 23-26) • the stop rail (e) for the parallel stop (7) has two different guide faces (high and low). • for thick material you must use the stop rail (e) as shown in fig. 25,...
Page 30
30 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 6.4.3 cutting width (fig. 26 - 28) • the parallel stop (7) has to be used when making longitudinal cuts in wooden workpieces. • the parallel stop (7) should be mounted on the right-hand side of the saw blade (5). •...
Page 31
31 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 6.5 adjusting the parallel stop (fig. 30) • set the saw blade to the maximum cutting depth (refer to point 6.2). • set the parallel stop (7) so that the stop rail (e) touches the saw blade (5) (setting for thick ma...
Page 32
32 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 6.6 cross stop (fig. 31-32) • slide the cross stop (13) into the groove (29) of the table. • slacken the knurled screw (30). • turn the cross stop (13) until the arrow points to the angle required. • retighten the ...
Page 33
33 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 6.8 adjusting the scale on the saw table (fig. 28; 34) • ensure that the parallel stop (7) is in line with the saw blade (5) (refer to point 6.5). • set the parallel stop (7) so that it touches the saw blade (setti...
Page 34
34 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 6.9 using the laser (fig. 35-38) • the laser (31) enables you to make precision cuts with your table saw. • the laser light is generated by a laser diode powered by two batte- ries. The laser light is enlarged to f...
Page 35
35 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 • do not place batteries on heaters or expose them to direct sunlight for long periods; temperatures in excess of 50° may damage the equipment. 35 36 37 38 32 33 34 31 34 + + 2 32 wzts_1700_aus_spk7.Indb 35 21.05.1...
Page 36
36 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 6.10 operation m important! • after every new adjustment we recommend you to make a trial cut in order to check the new settings. • after switching on the saw, wait for the blade to reach its maximum speed of rotat...
Page 37
37 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 6.10.1.2 cutting very narrow workpieces (fig. 41) • be sure to use a push block when making longitudinal cuts in very narrow workpieces with a width of 30 mm and less. • the low guide face of the parallel stop is b...
Page 38
38 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 6.10.1.3 making angular cuts (fig. 42) angular cuts must always be made using the parallel stop (7). • set the blade (5) to the desired angle. (see 8.3.) • set the parallel stop (7) in accordance with the workpiece...
Page 39
39 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 42 43 7 5 e 2 5 13 wzts_1700_aus_spk7.Indb 39 21.05.12 15:57.
Page 40
40 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 7 data technical data ac motor ................................................................................................... 240 v ~ 50 hz power p ................................................................
Page 41
41 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 wear ear-muffs. The impact of noise can cause damage to hearing. The quoted values are emission values and not necessarily reliable work- place values. Although there is a correlation between emission and im- missi...
Page 42
42 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 cleaning and maintenance important! Always pull out the power plug before starting any cleaning work. Cleaning • keep the safety devices free of dirt and dust as far as possible. Wipe the equipment with a clean clo...
Page 43
43 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 disposing of batteries batteries contain materials that are potentially harmful to the environ- ment. Never place batteries in your household refuse, in fire or in water. Batteries should be collected, recycled or ...
Page 44
44 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 never place electric power tools in your household waste! Instead of returning the equipment to the manufacturer, the owner of the electrical equipment is obliged to ensure that the equipment is properly disposed o...
Page 45
45 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 8 guarantee certificate congratulations! You have made an excellent choice of this quality product. Our commitment to quality also inclu- des our service. Should you, contrary to expectations, experience defects du...
Page 46
46 kundendienst • ÜgyfÉlszolgÁlat • poprodajna podpora u +43/1/8691480 @ 06(1) 237-0494 x 00386 15838304 www.Isc-gmbh.Info 46 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 wzts_1700_aus_spk7.Indb 46 21.05.12 15:57.
Page 47
47 kundendienst • ÜgyfÉlszolgÁlat • poprodajna podpora u +43/1/8691480 @ 06(1) 237-0494 x 00386 15838304 www.Isc-gmbh.Info 47 d 1300 922 271 service.Australia@einhell.Com after sales support wzts 1700 09/2012 wzts_1700_aus_spk7.Indb 47 21.05.12 15:57.
Page 48
Eh 05/2012 (01) wzts_1700_aus_spk7.Indb 48 21.05.12 15:57.