World Marketing Of America EUH1240 Instructions - page 2
IMPORTANT SAFETY FEATURES
•
This heater is equipped with an AUTOMATIC OVERHEAT SAFETY
DEVICE that will turn off the power to the HEATING ELEMENT should
the internal temperature of the heater exceed normal levels. If this
should happen the heating element will turn off. Should this
condition occur, immediately remove any obstructions and set the
heater on a level surface. When the temperature returns to normal
levels power to the heating element will be restored and the heater
should function normally.
•
This heater is for use on 240 volts. The cord has a plug of 6-20P as
shown on the front page. No adapter is available for this blade
configuration, and none should be used. The type outlet is a 240 volt
grounding outlet. When properly installed, it provides a ground
connection through the cord to the heater to protect the operator
from electric shock.
TROUBLE SHOOTING
If your heater fails to operate, please do the following:
•
Review these instructions to insure you understand the basic operations
and features of your heater. (Example: Overheat Protection)
•
Check your circuit breaker of fuse for proper operation.
•
Check for obstructions. Unplug the heater for 30 minutes, clear any
obstructions and restart the heater.
•
Do NOT expect the heating coils to glow. A tint of orange may be
noticeable in places on the element away from the main air flow.
CLEANING AND STORAGE
Dust, dirt, pet hair, etc can all diminish your heaters performance and can lead
to unwanted odors. For best performance clean your heater frequently, at least
once per season. ALWAYS TURN OFF AND UNPLUG THE HEATER
BEFORE CLEANING.
•
Turn Heater OFF, unplug it and wait for the heater to become cool.
•
Use a dry cloth to clean only external surfaces of the heater.
•
A vacuum with soft brush may used to clean louvered areas.
•
Wrap and tie the cord to protect it from damage.
•
Repack the heater in its original carton and store it in dry place.
NEVER attempt to open or service the heater yourself. Doing so may cause
damage or personal injury. (See Warranty Card for more information)
SPECIFICATIONS
Model NO.
EUH1240
(All specifications +/ - 10% tolerance)
Voltage
240V
Frequency
60Hz
Output Power (Watts)
4000 W
Electric Current (Amps)
20A
Dimensions ( W x D x H)
16” x 14” x 16”
Net Weight
16.5 lbs.
BTU’s per/Hour
13,650 High
FAN FORCED HEATER
MODEL EUH1240
FEATURES:
4000 Watt Heat Output
Thermostat Heat Control
Heat Circulating Fan
Carry Handle and Stand
Permanently Lubricated Motor
Comfort Home Products Inc. 12256 William Penn Hwy., Suite A
Huntingdon, PA 16652 Tel: (814) 643-6957
Made in China