User manual stb box 1 short instructions stb. 1. Plug in the cables. 2. Switch on stb box and turn on the tv. 3. Wait at least 2 min. 4. If the image does not appear: a) check that the cables are connected properly, the box is on (blue light on the left side in front and blue flashing (unevenly) on ...
2 stb box manual for safe and effective use of stb box product, please read the following before use warning- do not place the product in an ambient temperature too high or too low (10-30'c is normal). Keep the appliance indoors. Do not place the product in the vicinity of a magnetic fields. Do not ...
4. 1 short instructions stb 1 2 stb box manual 2 3 introduction 2 4 chapter 3 5 the basic functions 4 6 parameter list 4 7 item list 5 8 remote control icon 6 8.1. Key description 6 9 installing the remote control 7 10 connected display devices 7 11 pal audio and video output 7 12 ypbpr (component) ...
5 the basic functions full hd decoder 720p, 1080i, 1080p (1920 * 1080); all formats compatible with almost all support the current popular format for the market to support the h264, vc1, mpeg 1/2/4-sp, wmv, asf, divx 3.X video encoding format; support the real format, rm, rmvb8/9/10 (1920 * 1080); f...
Video encoding format audio formats mp3, aac, mpeg4-aac, mpeg4-bsac usb interface, usb host 2.0 * 2 rj45 lan interface sd card memory card support working environment temperature: 10 ℃ ~ +35 ℃: humidity: storage temperature: -20 ℃ ~ +70 ℃: humidity: 7 item list 1 remote control power line 1 power ad...
Introduction chapter remote control 8 remote control icon 8.1. Key description power: off / on mute: on / off the sound 0-9 numeric keys: enter numbers, alphabet, letters ← backspace: delete the character input vol + volume up vol - volume down previous flip key: in the list interface, quick page up...
Hdmi output - when you have hdmi cable. 9 installing the remote control install the batteries included into the remote control correctly. 10 connected display devices note: this product default by ypbpr (component) output video signal. 11 pal audio and video output to switch between the different si...
12 ypbpr (component) video and audio output to switch between the different signal inputs, press the colored button and then play / pause button. Http://world-tvpro.Com.
13 hdmi audio and video output to switch between the different signal inputs, press the colored button and then play / pause button. 14 connected to the network 14.1 wired network connection 14.1.1 connection cable http://world-tvpro.Com.
15 network settings connect the network cable, go to the set-top box "settings" -> "wired network" interface, according to the router 16 boot turn on the tv, select the correct video input channel. Connect power to the set-top box, click the power on/off, the set-top boxes takes about 30 seconds - t...
19 control during channel playing 19.1 directly switch channel when other channel is playing when a channel is playing, you can use or, or to select other channels without interrupting the current playing channel. 19.2 adjust sound volume when playing channels, press button on remote control to adju...
21 failure reference table there are many factors that will affect users ability to watch the channels smoothly, such as internet connection failed, dns resolving failed, or firewall limits. Users can figure out most problems according to the result of system diagnosis. The following failure table i...
22 frequently asked questions no picture or can not display properly if there is no display or the picture can not be properly shown, that maybe the stb output format is not compatible with the tv set display format, please configure the stb out format in the “video setup”, reboot your stb and have ...
