Worlde EASYKEY 25 User Manual - page 6
Transpose [-12...+12]
Use this to transpose the pitch of the keyboard up or down in semitone steps. The range is -12 to +12.
Velocity Curve [Velocity Curve 1...3/Const Velocity]
The velocity curve determines how the force with which you play the keyboard will affect the output level.
You can choose one of three velocity curves, or select a fixed velocity.
Keyboard operation in Edit mode
Pressing the [CC MODE] button, the twenty-five keys of the keyboard will function as independent
buttons to transmit control change messages. You can specify which MIDI channel the control change
message is transmitted on, whether or not each key is enabled, the key type, the control change number,
as well as the On and Off value.
CC MIDI Channel [1...16]
This specifies the MIDI channel that control change messages will be transmitted on. Set this to match the
MIDI channel of the application you’re controlling.
Key Enable [Disable/Enable]
Enables or disables the key. If a key is disabled, operating that key will not transmit a MIDI message.
Key Behavior [Momentary /Toggle]
Selects one of the following two modes:
Momentary: Pressing the key will send a control change message with the On value, releasing the key
will send a control change message with the Off value.
Toggle: Each time you press the key the control change message will alternate between the On value
and the Off value.
CC Number [0...127]
Specifies the CC number of the control change message that will be transmitted.
On Value [0...127]
Specifies the On value of the control change message.
Off Value [0...127]
Specifies the Off value of the control change message.