Worlde W660 Owner's Manual - page 16
MIDI FUNCTION
MIDI is the abbreviation of musical instruments digital interface. It allows the digital
instruments to communicate with each other, by sending and receiving compatible
notes, control change and program change, and as well as other types of MIDI data
and information.
MIDI is an international standard. It enables all the instruments to connect together,
and allows them to control each other and exchange data. That is, it makes all the
instruments a system, and greatly enlarges its function.
W660 can control MIDI device by transmitting note-related data and various types of
controller data, and also can be controlled by outside MIDI information, which can
automatically decide the music source mode, and choose MIDI track, voice and effect,
and change the parameter and as well as perform the appointed voice.
MIDI Interface
MIDI IN is to receive outside data from other MIDI devices like sequencer in order to
control this instrument; MIDI OUT is to send MIDI data (like the note and touch data)
from this instrument.
REMOTE PASSAGE
To set the MIDI passage to receive outside keyboard data, please select 01-16. The
outside keyboard must set the source passage from which the data is sent and its
MIDI OUT connects this keyboard's MIDI IN by the MIDI cable. When set is OFF, this
keyboard will receive from all the16 tracks. Pressing [-/NO] and [+/YES] buttons at
the same time can retune to the original setting (OFF).
KEYBOARD OUTPUT
To determine whether the data output from the MIDI OUT.
MIDI OUT
MIDI IN
Never use MIDI cables longer than about 15 meters. Cables longer
than this can pick up noise which can cause data errors.
CAUTION
16