Wys52fx730v wys52fx730vca operators manual.
Venom series mower 2 worldlawn power equipment, inc. Worldlawnpowerequipment.Com 2415 ashland ave beatrice, ne 68310 800-267-4255 fax – 402-223-4103.
Venom series mower 3 contents safety ....................................................................................................................................................................6 safety alert symbol ................................................................................
Venom series mower 4 driving the machine ................................................................................................................................... 18 driving forward ...............................................................................................................
Venom series mower 5 copper-based anti-seize.............................................................................................................................. 29 adjustments .....................................................................................................................
Venom series mower 6 safety safety alert symbol this symbol means: attention! Become alert! Your safety is involved! The safety alert symbol appears above information which alerts you to unsafe actions or situations and will be followed by the word danger, warning, or caution. Danger: white letterin...
Venom series mower 7 check that the operator’s presence controls, safety switches, and shields are attached and functioning properly. Do not operate unless they function properly. Danger in certain conditions gasoline is extremely flammable and highly explosive. A fire or explosion from gasoline can...
Venom series mower 8 operation although hazard control and accident prevention are partially dependent upon the design and configuration of the equipment, these factors are also dependent upon the awareness, concern and proper training of the personnel involved in the operation, transport, maintenan...
Venom series mower 9 warning hands, feet, hair, clothing, or accessories can become entangled in rotating parts. Contact with rotating parts can cause traumatic amputation or severe lacerations. Do not operate the machine without guards, shields, and safety devices in place and working properly. Kee...
Venom series mower 10 maintenance and storage before any maintenance, disengage drives, lower implement, set parking brake, stop engine and remove key or disconnect spark plug wire. Wait for all moving parts to stop before adjusting, cleaning or repairing. Park machine on level ground. Never allow u...
Venom series mower 11 caution if the ignition is in the “on” position there is potential for sparks and engagement of components. Sparks could cause an explosion or moving parts could engage causing personal injury. Be sure ignition switch is in the “off” position before charging the battery. Warnin...
Venom series mower 12 safety and instructional decals keep all safety signs legible. Remove all grease, dirt and debris from safety signs and instructional labels. Replace all worn, damaged, or missing safety signs. When replacement components are installed, be sure that current safety signs are aff...
Venom series mower 13 console decal – 453363 console graphics clutch on clutch off fast slow neutral reverse park brake choke.
Venom series mower 14 specifications model number wys52fx730v wys52fx730vca weight & dimensions length: 72” 62” w/platform up width: 72” 65” w/deflector up wheel base: 33” wheel track-front: 36” wheel track-rear: 44” weight: 750 lbs engine a. Kawasaki fx730v see your engine owner’s manual rpm: high ...
Venom series mower 15 operation operator controls steering and motion control: the motion control levers control the forward and reverse rotation of the respective tire. Speed is proportional to amount the levers are moved; moving the levers to the center (neutral) position brakes the movement of th...
Venom series mower 16 drive wheel release valves located on the right front corner of the hydrostatic pumps. Drive wheel release valves are used to release the hydrostatic drive system to allow the machine to be moved by hand without the engine running. With a 5/8 wrench, turn both valves one turn c...
Venom series mower 17 operating instructions starting the engine 1. Move both control levers to the neutral position. 2. Pull the parking brake lever rearward to engage the parking brake. 3. Push in (down) on the pto switch to the “disengage” position. 4. Place the throttle midway between the “slow”...
Venom series mower 18 disengaging the blades 1. Set the throttle midway between the “slow” and “fast” positions. 2. Push down on the pto switch to disengage the blades. Stopping the engine 1. Bring the unit to a full stop. 2. Move the motion control levers to the neutral position; move the control l...
Venom series mower 19 warning the operator platform is heavy and may cause injury when lowering and raising the operator platform. The platform may suddenly drop if not supported when the latch pin is pulled out. Do not put your hands or fingers in the platform pivot area when lowering or raising th...
Venom series mower 20 transporting transporting a unit use a heavy-duty trailer or truck to transport the machine. Lock brake and block wheels. Securely fasten the machine to the trailer or truck with straps, chains, cable, or ropes. Be sure that the trailer or truck has all necessary lighting and m...
Venom series mower 21 maintenance note: the left and right side of the machine is determined by standing in the normal operator’s position. Warning remove the key from the ignition switch, engage parking brake, and pull the wire(s) off the spark plug(s) before you do any maintenance. Also push the w...
Venom series mower 22 recommended maintenance schedule(s) maintenance service interval maintenance procedure before each use or daily check the engine oil level check the mower blades check the safety interlock system check for loose hardware check for belt obstructions check for fuel and oil leakag...
Venom series mower 23 check engine oil level check the engine oil daily before starting the engine otherwise shortage of the engine oil may cause serious damage to the engine such as seizure. Place the engine on a level surface. Clean area around the oil gauge before removing it. Remove the oil gaug...
Venom series mower 24 danger jump starting a weak battery that is cracked, frozen, has low electrolyte level, or an open/shorted battery cell, can cause an explosion resulting in serious personal injury. Do not jump start a weak battery if these conditions exist. 2. Make sure the booster is a good a...
Venom series mower 25 check mower blades service interval: before each use or daily stop engine, wait for all moving parts to stop, and remove key. Engage parking brake. 1. Lift deck and secure in raised position as stated in the clean grass build-up under deck section. 2. Inspect blades and sharpen...
Venom series mower 26 9. Return right control lever to neutral position, turn key switch to start, engine should start. 10. With control levers in neutral position, release park brake, engine should stop. Return park brake to “on” position. 11. Restart engine. With control levers in neutral position...
Venom series mower 27 check hydraulic oil level service interval: every 40 hours 1. Stop engine, wait for all moving parts to stop and remove key. Engage parking brake. 2. Clean area around hydraulic reservoir cap and remover cap. Oil level should be to the top of the baffle inside the tank. If not,...
Venom series mower 28 caution raising the mower for service or maintenance relying solely on mechanical or hydraulic jacks could be dangerous. The mechanical or hydraulic jacks may not be enough support or may malfunction allowing the unit to fall, which could cause injury. Do not rely solely on mec...
Venom series mower 29 wheel hub nut torque specification service interval: every 500 hours thereafter torque the nut on the wheel motor tapered shaft to 175-225 ft-lb (237-305 n-m) note: do not use anti-seize compound on the wheel hub. Thread locking adhesives thread locking adhesives such as “locti...
Venom series mower 30 7. Use the threaded adjustment on the front deck rod end to adjust the front blade tip up or down to achieve desired height. 8. Lower the discharge deflector. Pump drive belt tension self-tensioning – no adjustment necessary. Mower deck drive belt tension self-tensioning – no a...
Venom series mower 31 cleaning service interval: before each use or daily (may be required more often in dry or dirty conditions.) caution excessive debris around engine cooling air intake and exhaust system area can cause engine exhaust area and hydraulic system to overheat which can create a fire ...
Venom series mower 32 troubleshooting important: it is essential that all operator safety mechanisms be connected and in proper operating condition prior to mower use. When a problem occurs, do not overlook the simple causes. For example, starting problems could be caused by an empty fuel tank. The ...
Venom series mower 33 wiring schematics.
Venom series mower 34 hydraulic schematic.
Venom series mower 35 evaporative emission control warranty statement california evaporative emission control warranty statement your warranty rights and obligations the california air resources board and worldlawn power equipment is pleased to explain the evaporative emission control system's warra...
Venom series mower 36 worldlawn power equipment. Any such part repaired or replaced under the warranty must be warranted for a time not less than the remaining warranty period. (2) any warranted part that is scheduled only for regular inspection in the written instructions must be warranted for the ...
Venom series mower 37 limited warranty: worldlawn power equipment, inc, (“worldlawn”) warrants that the worldlawn venom series mower (“mower”), purchased from an authorized worldlawn dealer, will be free from defects in material and workmanship for a period of three years commercial/residential from...