Worx WX126 Original Instructions Manual

Manual is about: Lithium-ion cordless drill/driver

Summary of WX126

  • Page 1

    P06 p14 en d lithium-ion cordless drill/driver lithium-lonen-akku-bohrschrauber wx126 wx126.3.

  • Page 2

    Original instructions en Übersetzung der originalanleitung d.

  • Page 4

    1 2 3 4 5 6 7 8.

  • Page 5: Lock Unl

    Lock unl ock a b c d g e f.

  • Page 6

    6 lithium-ion cordless drill/driver en 1. Detachable keyless chuck 2. Torque adjustment ring 3. Two-speed gear control 4. Forward/reverse rotation control 5. Soft grip handle 6. Battery pack * 7. Battery pack release button 8. On/off switch 9. Led light (see fig. G) * not all the accessories illustr...

  • Page 7: Technical Data

    7 lithium-ion cordless drill/driver en technical data type wx126 wx126.3 (1-designation of machinery, representative of drills) voltage 12 v no load speed 0-350 / 0-1300/min number of clutch positions 15+1 max torque (soft/hard) 14/24n.M chuck capacity 10mm max. Drilling capacity steel 10mm wood 20m...

  • Page 8: Accessories

    8 lithium-ion cordless drill/driver en warning: to be accurate, an estimation of exposure level in the actual conditions of use should also take account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle but not actually doing the job. Thi...

  • Page 9: Additional Safety

    9 lithium-ion cordless drill/driver en additional safety rules for your cordless drill 1. Remove the battery pack from the drill before carrying out adjustments. 2. Do not expose to rain or water. 3. Do not store the battery pack in temperatures over 40 o c. 4. Always charge the battery pack between...

  • Page 10: Symbols

    10 lithium-ion cordless drill/driver en to reduce the risk of injury, user must read instruction manual warning wear ear protection wear eye protection wear dust mask indoor use only do not expose to rain or water do not burn do not dispose of batteries. Return exhausted batteries to your local coll...

  • Page 11

    11 lithium-ion cordless drill/driver en 2. Fitting and removing bits (see c) after removing the chuck, the tool can be used as a screwdriver. To use any one of the short bits supplied, insert the bit into the spindle. To remove the bit, simply pull it out of the spindle. 3. On / off switch (see d) d...

  • Page 12: Problem Solution

    12 lithium-ion cordless drill/driver en a very tight screw or continue working when the battery energy has expired. For manual screwdriver purposes, the chuck is automatically locked when the tool is off. 10. Using the led light to turn on the light simply press the on/off switch. When you release t...

  • Page 13: Maintenance

    13 lithium-ion cordless drill/driver en body. Position 1 is the lowest torque (screw driving force) and position 15 is the highest torque (screw driving force). Position “ “ is for drill operation. Regulate the torque adjusting ring to a higher position to reach the best result. 3. Reasons for diffe...

  • Page 14

    14 lithium-lonen-akku-bohrschrauber d 1. Abnehmbares schnellspannfutter 2. Einstellring fÜr rutschkupplung 3. Getriebesteuerung 4. Rechts-/linkslauf 5. Softhandgriff 6. Akku * 7. Akkuverriegelung 8. Ein/aus-schalter 9. Arbeitslicht (siehe g) * abgebildetes oder beschriebenes zubehör gehört teilweise...

  • Page 15: Technische Daten

    15 lithium-lonen-akku-bohrschrauber d technische daten typ wx126 wx126.3 (1-bezeichnung der maschine, repräsentant bohren) nennspannung 12 v nenndrehzahl 0-350 / 0-1300/min drehmomentstufen 15+1 max. Drehmoment (weicher/ harter) 14/24n.M bohrfutter spannweite 10mm max. Bohrleistung in stahl 10mm hol...

  • Page 16: Zubehörteile

    16 lithium-lonen-akku-bohrschrauber d vibrationssyndrom erzeugen. Warnung: um genau zu sein, sollte ein abschätzung des belastungsgrades aller arbeitsabschnitte während tatsächlicher verwendung berücksichtigt werden, z.B. Die zeiten, wenn das werkzeug ausgeschaltet ist, und wenn es sich im leerlauf ...

  • Page 17: Zusätzliche

    17 lithium-lonen-akku-bohrschrauber d zusÄtzliche sicherheitshinweise fÜr akku-bohrmaschinen 1. Entfernen sie den akku aus der maschine, ehe sie irgendwelche einstell-, reparatur- oder wartungsarbeiten vornehmen. 2. Setzen sie das werkzeug niemals regen oder feuchtigkeit aus. 3. Lagern sie den akku ...

  • Page 18: Symbole

    18 lithium-lonen-akku-bohrschrauber d symbole hinweise zum betrieb hinweis: lesen sie das handbuch vor inbetriebnahme des werkzeuges sorgfältig durch. Bestimmungsgemässer gebrauch das elektrowerkzeug ist bestimmt zum eindrehen und lösen von schrauben sowie zum bohren in holz, metall, und kunststoff....

  • Page 19

    19 lithium-lonen-akku-bohrschrauber d anschließend ziehen sie das futter nach vorne hin ab. Zum anbringen führen sie zunächst die spindel in das futter ein, dann drehen sie die hintere hülse gegen den uhrzeigersinn. 2. Aufsetzen und entfernen von bohrerspitzen (siehe c) nach abnehmen des futters kön...

  • Page 20

    20 lithium-lonen-akku-bohrschrauber d 8. Einstellung des drehmoments (siehe f) (die schraubkraft ihres schlagbohrers) das drehmoment wird durch verdrehen des drehmomenteinstellrings eingestellt. Das drehmoment wird größer, wenn sie den drehmomenteinstellring in richtung größere einstellwerte drehen....

  • Page 21: Problembehebung

    21 lithium-lonen-akku-bohrschrauber d 13. Überlastungsschutz bei Überlastung hält der motor an. Schalten sie das gerät aus und warten sie bis sich das gerät ausreichend abgekühlt hat bevor sie wieder einschalten. Verringern sie die belastung des gerätes. 14. Temperaturabhängiger Überlastschutz bei b...

  • Page 22: Konformitätserk-

    22 lithium-lonen-akku-bohrschrauber d konformitÄtserk- lÄrung wir, positec germany gmbh konrad-adenauer-ufer 37 50668 köln erklären hiermit, dass unser produkt, beschreibung worx lithium-lonen-akku- bohrschrauber typ wx126 wx126.3(1-bezeichnung der maschine, repräsentant bohren) funktionen bohren de...

  • Page 24

    Copyright © 2012, positec. All rights reserved. 2cdt36ppk11001a1.