X-cam A10-3H User Manual - page 4
Pushspeed: Setupthecameramountmovingspeed,highvaluesethighspeed;lowvaluesetlowspeed.
3. sensors advanced calibration
Thisisanadvancedsetup,normallyitdoesnotneedtosetunlessserioustilthashappenedontheTiltorRollaxis.moredetalisplease
readtheX-CAMA10-3Hinitialdataresetguideappendix1.
3. the Function choosing on single control
Youmaychoosethefunctiononsinglecontrolmode,thedefaultisModeSwitch.
Firmware upgrade
1. PowerofftheX-CAMA10-3H
2. Uses the USB cable to connect with your PC, Normally
the windows can find the driver automatically, you will
findthePORTnumberinthedevicemanager.
3. SelecttheCOMportnumber
4. Openthefirmwarefile(*.bin)
5. Click“LoadandConnect”button
6. Power on the X-CAM A10-3H, it will upgrade the
firmwareautomatically,
Theblueindicatorwilllight,
and red indicator will flash quickly. When the
upgradeiscompleted,theredindicatorwilllight,
andtheblueindicatorwill flashquickly
Notice: Pleasedonottouchanythingandkeepthepoweron
duringtheupgrade,iftheupgradeisbreakpleasebacktoSTEP
1 and try again, normally it could be fix automatically. It will
beep4timesafterupgradeandthesystemwillberestarted.