1. DL manuals
  2. X-cam
  3. Camera Accessories
  4. A22-3H
  5. User Manual

X-cam A22-3H User Manual

Summary of A22-3H

  • Page 1

    X-cam a22-3h for sony nex5 3 axis gimbal user manual x-cam a22-3h has been finished with all the adjustments before launch the market, ready to run. Parameters weight:  680g(withoutcamera&lens)    stabilizationfrequency:  5200hz inputvoltage:  11.1v~22.2v(3s~6slipo)  tilttrav...

  • Page 2

    Pc software connect with pc uses the usb adapter to connect with your pc , normally the windows can find the driver automatically, you could find the port number in the device manager launch the x-cam gimbal stabilization module assistant , choose the correct port number and click connect.

  • Page 3

    Beep beep will be shouted after the connection succeed, the parameters will be read out automatically. The parameters as below: 1. Gains there are 2 gains, position gain and acceleration gain pos. Gain: inclined the gimbal to one position slowly and watch the image is horizontal or not, if not just ...

  • Page 4

    3. Sensor calibration auto calibration ifthescreenframeisnot  horizontalpleasedothe“autocablibration”as below: 1. Putabalanceofbubbleballonthecameraframeandmakethecamera frameisperpendiculartothegroundby90degree. 2. Makethecameraframeishorizontalmanually ...

  • Page 5

    内置 hdmi 转 av 模块 initial settings: 1. Set the camera hdmi output to auto resolution mode. 2. Set the video mode to infrared remote control mode. 3. Connect rcd3015g hdmi converter with the camera, connect the servo cable of shutter controlling with the remote control receiver. 4. Initialize the camer...

  • Page 6

    Firmware upgrade 1. Turn off the x-cam a10-3h 2. Uses the usb cable to connect with your pc, normally the windows can find the driver automatically, you will find the port number in the device manager. 3. Select the com port number 4. Open the firmware file ( *.Bin ) 5. Click “load and connect” butt...