X-TREME XA-1000 Product Handbook - page 10
Page10
Braking distance is affected by wet conditions and loose and uneven riding surfaces.
Tires and Wheels
The X-Treme XA-1000 uses an identical rim and tire assembly on the front and
rear wheels. Tires can easily be rotated between front and back wheels.
Tire wear will differ based on rider weight, riding conditions and care.
Replacement tires/wheels can be obtained at your local X-Treme dealer,
through
motorcycle
shops,
or
from
the
X-Treme
website
at
www.x-tremescooters.com
Tire Pressure
The tire must be inflated to a maximum of 24 P.S.I. It is also recommended to
use a tube additive like Slime, availablefrom any motorcycle shop, to avoid
inconvenient punctures.
MAINTENANCE
MAINTENANCE SCHEDULE
Proper care of your X-Treme XA-1000 will insure optimal performance and
longer life span. The following are a few maintenance suggestions that will
keep your X-Treme XA-1000 running in top condition:
Daily Maintenance
Perform each time you ride your XA-1000
Clean the exterior of the unit with a soft, damp rag.
Check that all nuts and bolts are securely tightened.
Check battery charger for any frayed/cut wires.
Check chain tension. Must maintain approximately ½ to ¾ inch
movement in center of chain.
OTHER QUESTIONS
For additional questions, service instructions, further information and important
phone numbers, please go to the X-Treme website at www.x-tremescooters.com
Thank you for purchasing an X-Treme XA-1000 and please tell your friends how much fun
you’re having on the X-Treme XA-1000