X10 PHT02 Owner's Manual - Warranty

Manual is about: Mini Timer

Summary of PHT02

  • Page 1

    ™ ® mini timer owner's guide mini timer pht02.

  • Page 2: Contents

    Pht02_6/98 tampa, fl33618 mini timer ™ ® 2 contents introduction .............................................................................................. 3 quick tour ................................................................................................ 5 how to program a timed event...

  • Page 3: Introduction

    Pht02_6/98 tampa, fl33618 mini timer ™ ® 3 introduction the x-10 pro ™ mini timer controls up to 4 x-10 pro ™ modules automatically (8 instantly). You can have your outside lights as well as inside lights and appliances go on and off at preset times to give your home a lived-in look while you are aw...

  • Page 4: Introduction

    Pht02_6/98 tampa, fl33618 mini timer ™ ® 4 how it works the mini timer plugs into any ac outlet in your home and transmits digitally encoded signals over your house wiring instantly or at the times you set. These signals are received by the x-10 pro ™ modules. You plug a lamp up to 300 watts into a ...

  • Page 5: Quick Tour

    Pht02_6/98 tampa, fl33618 mini timer ™ ® 5 let’s quickly review the functions of each part of the keyboard (you can go to page 7 for a step by step tutorial if you prefer). Referring to the diagram below and the cutaway sections that follow you will see that the keyboard on the mini timer consists o...

  • Page 6: Quick Tour

    Pht02_6/98 tampa, fl33618 mini timer ™ ® 6 quick tour how to program a timed event 1. Place mode switch in “prog set” position. 2. Advance to the desired time. 3. Press any of the 4 on or off rocker keys to set an on or off time for that module. This will program the mini timer to turn that module o...

  • Page 7: Setting Up The Mini Timer

    Pht02_6/98 tampa, fl33618 mini timer ™ ® 7 setting the clock plug the mini timer into any convenient ac outlet. Place a 9 volt alkaline battery in the battery compartment to protect the time and program for up to 48 hours in the event of a power outage. Test the battery by pressing “once” or “securi...

  • Page 8: Setting Up The Mini Timer

    Pht02_6/98 tampa, fl33618 mini timer ™ ® 8 setting up the mini timer to dim and brighten lights connected to a lamp module or wall switch module, first select the module by pressing and releasing the on rocker key for the desired module, then press the bright or dim rocker key. Hold the key pressed ...

  • Page 9: Programming On and Off Times

    Pht02_6/98 tampa, fl33618 mini timer ™ ® 9 setting something to happen every day at the same time. After you have installed all of your modules and checked that they are working instantly from the mini timer you are ready to program timed events. 1. Set the mode switch to the “prog set” position. 2....

  • Page 10: Programming On and Off Times

    Pht02_6/98 tampa, fl33618 mini timer ™ ® 10 setting a timed event to occur in the “security” mode if you advance to a specific time, and then press one of the on or off rocker keys, you will set an on or off time for that unit code to occur every day at exactly the same time. If however, you press t...

  • Page 11: Programming On and Off Times

    Pht02_6/98 tampa, fl33618 mini timer ™ ® 11 reviewing timer events set the mode switch in the “prog review” position (the display may show an apparently random time until you press a key). If you press any of the 4 on (or off) rocker keys, the display will show the on (or off) time programmed for th...

  • Page 12: Alarm Settings

    Pht02_6/98 tampa, fl33618 mini timer ™ ® 12 alarm settings setting the alarm buzzer with the “buzzer” switch in the “on” position, any program you set for module number 1 (or module number 5 if the selector switch is set to 5-8) will also set the internal alarm buzzer. For example: if you connect yo...

  • Page 13: Alarm Settings

    Pht02_6/98 tampa, fl33618 mini timer ™ ® 13 suspending the wake up function if you set channel 1 for an on time of 7:00 am and number 1 is your bedside lamp, at 7:00 am every day, your bedside lamp and internal buzzer will turn on. If you turn the buzzer switch off on friday nights the buzzer will n...

  • Page 14: Troubleshooting

    Pht02_6/98 tampa, fl33618 mini timer ™ ® 14 1 if a particular module won’t go on or off from the rocker keys on the mini timer: check that you have power to the outlet controlling the module and the switch on the light or appliance is on. Check that the unit code and housecode on the module are set ...

  • Page 15: Warranty

    Pht02_6/98 tampa, fl33618 mini timer ™ ® 15 warranty 24 month limited warranty x-10 pro warrants its products to be free from defective material workmanship for a period of two (2) years from the date code or from the original date of purchase (with receipt). X-10 pro agrees to repair or replace at ...

  • Page 16

    Pht02_6/98 tampa, fl33618 mini timer ™ ® 16.