Mini timer owner's manual model xpmt4 pro.
2 3 introduction ......................................................................................................3 quick tour ........................................................................................................5 how to program a timed event ....................................
4 5 let’s quickly review the functions of each part of the keyboard (you can go to page 7 for a step by step tutorial if you prefer). Referring to the diagram below and the cutaway sections that follow you will see that the keyboard on the mini timer consists of 7 basic areas. 1. Mode switch. This i...
6 7 how to program a timed event 1. Place the mode switch in “prog set/review” position. 2. Advance to the desired time. 3. Set the 1-4/5-8 switch to the desired position. 4. Press any of the 4 on or off buttons to set an on or off time for that module. This will program the mini timer to turn that ...
8 9 setting a timed event to occur once only if (within 4 seconds after setting an on or off time) you press the “mode” button once or twice until once shows in the display, you will modify the program for that particular unit code to occur only once. The event you have programmed will happen (at th...
10 11 if the display shows full if full is displayed when you try to enter a programmed time, this means that you have tried to enter an additional time when you have already used up all the available memory. Cancel one or more of your set times by pressing a number on (or off) button, then press cl...
12 13 for example: if you connect your bedside lamp to a lamp module set to unit code 1 and then program module number 1 for an on time of 7:00 am - at 7:00 am your bedside lamp will turn on and the internal buzzer in the mini timer will sound. You can turn the buzzer off (when you wake up) by slidi...
14 15 setting the appliance module’s code (modules sold separately) using a small screwdriver, set the red house code dial to the same letter as your mini timer. Set the black unit code dial to any unused number. Ratings the appliance module can be used to control an incandescent lamp rated up to 50...
16 17 troubleshooting accessories modules a wide range of switch and control modules are available from x10 pro, all of which can be controlled from the mini timer. Modules available include replacement wall switches, x10 controlled ac outlets, screw-in lamp modules, plug-in lamp and appliance modul...
18 19 notes notes.
2 year limited warranty x10pro-usa.Com (x10pro-usa), a division of authinx inc., warrants this product to be free from defective material and workmanship for a period of 2 years from the original date of purchase at retail. X10pro-usa agrees to repair or replace, at its sole discretion, a defective ...
