1 78-00018 rev b 032912 xaact xtract 200 read and understand these instructions before operating the machine information & operating instructions.
2 machine specifi cations . . . . . . . . . . . . 2 record important information: . . . . . . 2 safety information & cautions . . . . . . 3 your new machine . . . . . . . . . . . . . . . 4 system features . . . . . . . . . . . . . . . . 4 chemicals . . . . . . . . . . . . . . . . . . . . . 4 tools &...
3 read and save these instructions warning! To reduce the risk of personal injury or property damage, follow these procedures: • connect to a properly grounded outlet only. • do not operate the machine in an explosive environment. • do not use solvents. • never add water over 120 ºf/49 ºc to the sol...
4 your new machine: xaact products thoroughly tests every machine it sells before it is packaged. When you receive your new machine, examine the packaging for signs of shipping damage. Carefully unpack the machine and inspect it. If you see evidence of damage to the container or the contents, contac...
5 connect solution hose here rear view front view latches power cord pigtails loading wheels switches & green light { wand holder recovery tank access recovery tank drain hose solution hose connects here recovery hose connects here solution tank fill hole swivel castor views of the machine: pump swi...
6 1. Before each use, inspect the machine, hoses, and cleaning tool for cleanliness and completeness. Ensure the spray nozzles on the cleaning tool are tight and that the ball fl oat in the recovery tank is clean and operational. 2. Close the clear, screw-on lid on the recovery tank, and screw the c...
7 xtract 200 part list 120v 1 80-00180 1 hose, drain, with cap 2 80-00178 1 hook & loop strap, for wand hold-down 3 80-00142 2 wheel, 3” 4 80-00162 1 ball float, vac shut-off 5 80-00038 1 clear lid with mounting plate 6 71-00104 1 recovery tank, specify model 7 80-00130 1 hose barb, 1-1/2” vac hose ...
Xtract 200 heated 120v 1 3 4 5 7 8 9 11 13 14 15 17 19 20 22 25 31 18 18a 10 12 22 17a 30 22 16 24 27 27 28 15a 2 12a 32 22 8a 21 23 14a 6 35 34 33 rev 040312 8 26.
9 this warranty covers the xaact xtract 200 against defects in material or workmanship. The warranty is not transferable and is extended to the original owner, only. This warranty extends for the following time frames/components/labor, as stated: • lifetime from the date of purchase on the plastic h...
10 always unplug the machine before disconnecting or connecting any wires or components. Symptom possible cause low pressure plugged or dirty pump inlet fi lter; pump is leaking; no spray solution tank is empty; quick couplings on solution line are not completely connected to machine or tool; spray ...
