Xact M4X Owner's Manual

Summary of M4X

  • Page 1

    Congratulations on your selection of a quality xact product. With proper care and adherence to the set-up and user instructions in this owner’s manual, this unit will provide you with years of trouble-free service. Xact is committed to providing quality products that fit your needs. We would like to...

  • Page 2

    1. Channel number (1~22) – shows the current channel 2. Transmit indicator (tx) – indicates when the unit is transmitting 3. Receive indicator (rx) – indicates when the unit is receiving a transmission 4. Volume selection (8 bars) – shows the current vol ume setting 5. Call tone transmission (call) ...

  • Page 3

    Your m4x communicator uses 3 aaa size alkaline battery. To install the battery: 1. Release the battery compartment cover latch located on the rear side of the unit, and remove the battery compartment cover from the battery compartment. 2. Install the batteries into the battery compartment. Be certai...

  • Page 4

    Your m4x communicator comes with a neckband and belt clip to allow you to wear your communicator around your neck or clip it in your belt. To install the neck cord, simply insert the neck cord loop into the holder found at the sides of the unit. To remove the neck cord, simply pull the neck cord loo...

  • Page 5

    1. Installing the battery will automatically turn-on the unit and proceeds to watch mode. 2. Enter to communicator mode by pressing and holding the power key for around 3 seconds. To exit communicator mode, press the power key for around 3 seconds while on communicator mode. 2. Check the battery con...

  • Page 6

    Choosing a channel your m4x communicator has 22 channels you can use to talk to others. To choose a channel: 1. To enter or exit to communicator mode, press the power key for about 3 seconds. A long keybeep tone is locally generated (after a short keybeep tone) when the unit goes into communicator m...

  • Page 7

    The automatic power save feature your m4x communicator has a unique circuit designed to dramatically extend battery life. If it senses no transmission within 5 seconds, it automatically switches to the power save mode. The communicator can still receive transmissions in this mode. The display backli...

  • Page 8

    This device complies with part 15 of the fcc rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference (2) this device must accept any interference receiv ed, including interference that may cause undesired operation important: changes or modificatio...

  • Page 9

    Symptoms solution no power • check the batteries. Ensure that the batteries are installed properly. • the batteries may be weak. • recharge your batteries by using the a/c adapter charger. • your batteries may be damaged. Replace old batteries with new one reception is weak • press the up key to inc...

  • Page 10

    Xact products one-year limited warranty this limited warranty sets forth all xact products responsibilities regarding to your m4x. There are no other expressed or implied warranties from xact products . Warranty service provided if you purchased the m4x unit new from a retail vendor, xact products w...

  • Page 11

    For your reference: model number _________________________ date of purchase _______________________ name of dealer ________________________ customer service telephone number 1-800-864-2199 fcc licensing information channels 1 thru 14 transmit on frs frequencies channels 15 thru 22 transmit on gmrs f...