1. DL manuals
  2. Xact
  3. Telephone
  4. XD6451
  5. User Manual

Xact XD6451 User Manual

Summary of XD6451

  • Page 1

    Product definition document suncorp communications (europe) ltd. Pd343 product definition document version 1.1 customer: xact country: usa model: xd6451 / xhb401 roadmap number: dect 34-2 cabinet reference: t21.

  • Page 2

    Fcc interference informa tion x fcc interference information this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference; and (2) this device must accept any interference received, including interference...

  • Page 3

    Fcc rf radiation exposure statement the installation of the base unit should allow at least 20 centimeter between the base and persons in compliance with fcc rf exposure guidelines. For body worn operation, the portable part (handset) has been tested and meets fcc rf exposure guidelines. This device...

  • Page 4: Consumer Information:

    Consumer information: a) this equipment complies with part 68 of the fcc rules and the requirements adopted by the acta. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format us:aaaeq##txxxx. If requested, this number must be provided t...

  • Page 5

    G) should you experience trouble with this equipment, please contact: company name: xact communication,llc. Address: 105 madison avenue new york, ny 10016 telephone: 212 481 7950 for repair or warranty information. If the equipment is causing harm to the telephone network, the telephone company may ...

  • Page 6

    ''this product meets the applicable industry canada technical specifications.” before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of co...

  • Page 7

    Product definition document suncorp communications (europe) ltd. Pd343 9 2 panel layout 2.1 handset front 1 4096 colour; full graphic (1.4 inch), 128 x 128 pixels lcd 2 softkey 1 3 talk on / handsfree (switch between talk and handsfree mode) 4 enter redial list / pause / volume up 5 * / switch from ...

  • Page 8

    Product definition document suncorp communications (europe) ltd. Pd343 10 2.2 base unit 1 page key 2 volume up 3 volume down 4 ogm key 5 answer on/off 6 power / in use indicator led 7 delete 8 charging indicator 9 play 10 skip forwards / set ringer delay 11 stop 12 skip backwards / record memo 13 me...

  • Page 9

    Text messaging answer machine calls list reminders useful numbers settings registration silent alarm once annually add event show details edit event send as a text delete event at event time 30 min before del. All events clock & alarm product - menu tree menu contact handset 1 key_soft_1 search add ...

  • Page 10

    > write message templates delete messages text settings product - menu tree (cont.) key_soft_1 text messaging select back text messaging reply forward message details use number delete call save > send save insert symbol insert emoticon insert template message type text e-mail fax drafts outbox send...

  • Page 11

    Product - menu tree (cont.) key_soft_1 set handset ringtone show details edit entry delete entry delete all > key_soft_1 useful number select back useful number > select back set handset settings set base ringer volume handset name language wallpaper screensaver light timeout auto talk key beep redi...

  • Page 12

    1 . When there is/are (a ) new missed call(s) - the display prompts "you have (a) new missed call(s)" (see screen a0). To view missed call(s) pr e s s view (key_soft_1) - the user is taken directly to the list of new missed calls . To view the call(s) at later time press back (key_soft_2) at screen ...

  • Page 13

    Battery indications menu contact handset 1 g0 battery is fully charged battery is partially charge d battery is running low battery is almost dis c h a r g e d volume indications mute contact handset 1 g1 volume 5 g2 save back ringer volume ringer off name contact handset 1 g3 1 . Volume bars are pr...

  • Page 14

    Paging call 1 . To locate a missing handset p r e s s k e y _ p ag e o n t h e b a s e - all handsets will ring and the display will prompt " paging call " . 2 . To cancel the paging request - pres s k e y _ p ag e a g a in o n the base. 3 . To stop the paging call - press stop (key_sof t _ 1 ) o r ...

  • Page 15

    Welcome mode g13 g14 sélect. Retour uk (bt) uk (abc) pays france g15 réinit. Terminée pays menu noms combiné 1 g16 key_soft_1 1 . A welcome mode is presented when a product is powered on for the first time and after a factory reset. A welcome mode enables automatic configuration of the line interfac...

  • Page 16

    Call handling making calls to make a call (pre dialling): 1 . Enter your destination number and press k e y _ t al k . If you make a mistake, press clear ( k e y _ so f t _ 2 ) . 2 . Press key_tal k t o d ia l o u t . To make a call (manual dialling): 1 . Press key_talk to get the d ia l t o n e . 2...

  • Page 17

    - if the user subscribes to caller display - the handset will prompt both name and number for all incoming calls (see scre e n d 1 0 ) . - the name or number of the call for either an incoming or external call is retained on the display in-call screen. If the user does not subscribe to caller displa...

  • Page 18

    Internal calls to make an internal call: 1 . On your handset (handset 1), press k e y _ i n t followed by the handset number you want to call. 2 . P r e s s ok (key_soft_1), the call attempt is m a d e immediate ly . 3 . " internal call handset x " is displayed on hand s e t 1 where x is the called ...

  • Page 19

    Call handling (cont.) conference calls to start a conference ca ll: 1 . On your handset (handset 1), p r e s s k e y _ i n t followed by the handset number you want to call. 2 . P r e s s ok (key_soft_1), the call attempt is m a d e immediate ly . Or press back (key_soft_2) t o c a n c e l t h e c a...

  • Page 20

    Menu contact handset 1 p0 p6 select back search contact copy phonebook memory status add entry p1 p2 select back show details alex edit entry copy entry ringtone delete entry options back alex contact charles david bill _ delete phonebook dialling codes phonebook/contact to access your contact list ...

  • Page 21

    Copy phonebook (to handset) p24 select back copy phonebook key_soft_1 to handset to sim from sim p25 select back to handset key_soft_1 handset 2 handset 4 handset 3 p22 select back search contact copy phonebook memory status add entry dialling codes menu contact handset 1 p21 key_soft_2 key_down p23...

  • Page 22

    Copy phonebook (to sim) phonebook/contact (cont.) p45 select back copy phonebook to handset to sim from sim p46 back please wait ... 2% copy phonebook p48 back copying copy phonebook p49 if sim is not pin protected ... Key_soft_1 p50 back x entries copied copy phonebook go to p45 if sim is pin prote...

  • Page 23

    Delete phonebook phonebook/contact (cont.) p72 select back search contact copy phonebook memory status add entry dialling codes key_up p73 select back delete phonebook contact copy phonebook memory status add entry dialling codes key_soft_1 p74 yes no delete phonebook delete all entries ? Key_soft_1...

  • Page 24

    Phonebook/contact (cont.) copy entry (to handset) p106 p107 select back show details alex edit entry copy entry ringtone options clear suncorp uk contact s_ send message key_soft_1 p108 select back show details alex edit entry copy entry ringtone send message key_down key_soft_1 p109 select back cop...

  • Page 25

    Delete entry phonebook/contact (cont.) p129 yes no delete entry delete jane ? Key_soft_1 p130 p131 delete entry jane deleted p126 p127 select back show details alex edit entry copy entry ringtone options back jane contact _ send message key_soft_1 p128 select back delete entry alex edit entry copy e...

  • Page 26

    1 . Up to 250 entries can be stored on the handset depending on the handse t e e p r o m s iz e . 2 . Each contact consists of a name of up to 1 2 char a c t e r s and a number up to 24 digits. 3 . Both a name and a number have to be entered for an entry to be saved. Save (key_soft_1) is not prese n...

  • Page 27

    Notes: phonebook/contact (cont.) 3 6 . Some sim cards can save up to 20 characters in t h e n a m e field and some 12 charact e r s . If the maximum character allowed for the name field on the handset is 12 - then the first 12 characters are copied . The same applies to the number field. 3 7 . There...

  • Page 28

    Text messaging write message (send) s0 select back write message text messaging drafts templates inbox outbox key_soft_1 text settings delete messages s3 s2 key_soft_1 s6 s7 select back write message key_soft_1 insert template save insert emoticon send insert symbol send clear send to enter number: ...

  • Page 29

    Text messaging (cont.) write message (insert template) s34 s33 s35 s36 s37 s38 s28 s27 key_soft_1 select back write message key_down insert template save insert emoticon send insert symbol options back write message abc _ s29 select back write message insert template save insert emoticon send insert...

  • Page 30

    Text messaging (cont.) inbox (message details) s52 s51 s53 s54 s55 s56 select back write message text messaging drafts templates inbox outbox key_soft_1 key_soft_1 read back suncorp uk inbox nush key_soft_1 options back inbox meeting is cancelled! Select back inbox use number reply message details d...

  • Page 31

    S79 s78 s80 s81 s82 s83 select back write message text messaging drafts templates inbox outbox key_soft_1 key_soft_1 read back suncorp uk inbox nush key_soft_1 options back inbox meeting is cancelled! Select back inbox use number reply message details delete forward key_down select back inbox use nu...

  • Page 32

    S105 s104 s107 select back write message text messaging drafts templates inbox outbox key_soft_1 text messaging (cont.) templates (edit) options back templates empty empty empty key_soft_1 s106 select back templates delete edit key_soft_1 back templates abc 32 _ s108 key_soft_1 save clear templates ...

  • Page 33

    S131 s130 delete messages (outbox) select back delete messages drafts inbox outbox key_down all messages s132 yes no key_soft_1 outbox delete messages ? S134 go to s131 select back delete messages drafts inbox outbox all messages key_soft_1 s136 s135 delete messages (all messages) select back delete...

  • Page 34

    Text messaging (cont.) s156 select back service centres receive centres set send centre send centres key_down s157 key_soft_1 select back send centres send centre 2 send centre 1 s158 select back service centres receive centres set send centre send centres s160 save back send centre 1 enter number: ...

  • Page 35

    Text messaging (cont.) text settings (message alert) s179 select back text settings mailbox number service centres message type message size message alert s184 select back text settings mailbox number message type message size message alert delivery report text settings (delivery report) key_soft_1 ...

  • Page 36

    Text messaging (cont.) text settings (delete user) > select back text messaging s205 key_soft_1 s206 select back users general user nush key_soft_1 s207 select back write message text messaging drafts templates inbox outbox key_down s209 s208 select back text messaging key_soft_1 select back text se...

  • Page 37

    Text messaging (cont.) additional screens: s235 memory full delete message s236 no messages s237 incorrect pin ! S238 office 1 message sending failed 1 . A total of 50 short messages can be stored across all u s e r s inbox and outbox. The memory is fully dyna m ic over all users inbox e s . 2 . Onl...

  • Page 38

    Text messaging (cont.) 2 8 . The emoticons included on the product are: press key_up and key_down to highlight the emoticons you want and press insert (ke y _ so f t _ 1 ) t o in s e r t s e le c t e d e m o t ic o n . 2 9 . When an emoticon is selected from the table it is shown in the message. If ...

  • Page 39

    Text messaging (cont.) 6 0 . If an sms is received with incorrect sub-address - after checking the fsk data and determining that the smsc number is correct but the subaddress that has been sent is incorrect, subsequent ring bursts will be audible. 6 1 . User master reset via set base menu will not c...

  • Page 40

    Answering machine e0 e1 tam screening menu contact handset 1 quiet handset 1 external call suncorp uk screen recording suncorp uk e2 an incoming call arrives ... Key_soft_1 end recording suncorp uk e3 screen recording suncorp uk e4 key_soft_2 play back handset 1 you have 1 new message e5 when the re...

  • Page 41

    Answering machine (cont.) play message (delete) options back jane 01/14 09:30 pm e28 play messages key_soft_1 key_soft_1 select back play messages delete repeat message play previous pause play next e29 deleted e31 play messages key_down select back play messages delete repeat message play previous ...

  • Page 42

    Answering machine (cont.) record ogm (answer & record) key_soft_1 select back answering machine outgoing message play all record memo play answer on/off e52 e53 select back record outgoing message play key_soft_1 please speak after the tone e55 answer & record save recording ... E56 answer & record ...

  • Page 43

    Answering machine (cont.) play ogm (answer only) - if there is a personal ogm saved e82 select back answer & record play answer only key_down e83 select back answer & record play answer only key_soft_1 e84 select back default ogm answer only personal ogm e85 ok back playing ... Answer only key_soft_...

  • Page 44

    Answering machine (cont.) ogm language key_soft_1 select back answering machine outgoing message answer settings record memo delete messages answer on/off e104 key_soft_1 select back answer settings remote access answer mode message alert ogm language answer delay e105 e106 select back ogm language ...

  • Page 45

    Answering machine (cont.) message alert key_soft_1 select back off message alert on key_soft_1 go to e125 set to off message alert set to on message alert or e125 e126 e128 e127 select back answer settings remote access answer mode message alert ogm language answer delay e129 remote access key_soft_...

  • Page 46

    Answering machine (cont.) notes: 1 . When the answering machine takes the line (see screen e2) pre-set ogm is played. This can be default / personal answer and record, or default / personal answer only ogm. At this time the tam recording icon (red dot) will flash on the display. 2 . Incoming message...

  • Page 47

    2 2 . If play all is selected from scre e n e 1 4 6 : - for product without voice prompts : on screen e147, there are three new and two old messages, message 3, 4, and 5 will be played first and then old messages, message 1, and 2. Once all messages have been played - the display prompts " end of me...

  • Page 48

    Answering machine (cont.) 3 2 . To record memo, select record memo on screen e 4 5 . For product without voice prom p t s : when record memo is selected on screen e45 - the display pro m p t s " please speak after the tone " (see screen e46). When t h e recording starts the tam recording icon will f...

  • Page 49

    4 1 . To play an ogm, select the type of ogm to play (see screen e69). Screen e70 is only offered if there is a person a l o g m s a v e d. 4 2 . Playback of voice prompts and ogms are in handsfree mode and can be switched to handset mode at any time by pressing k e y _ t a l k . 4 3 . During the pl...

  • Page 50

    Answering machine (cont.) dtmf code operations with voice prompts without voice prompts to enter remote access mode * to enter remote access mode to hear main menu no acti on 1 2 to play all messages to play all messages to record a new ogm to play new messages to skip back during messages to skip b...

  • Page 51

    Answering machine (cont.) 1 6 . Messages will be selectively deleted if dtmf 5 is received. Confirmation that the message has been deleted will be by the unit announcing v3 and skipping forward to play the next message, or to the end of message sequence described above. Messages are marked for delet...

  • Page 52

    Calls list missed calls (show details) c0 c1 c2 missed calls (save number) c6 c7 c8 c10 c4 c3 select back delete calls calls list received calls voicemail calls missed calls dialled calls options back 02074030201 missed calls nush missed calls key_soft_1 key_soft_1 c9 mama select back save number de...

  • Page 53

    Calls list (cont.) received calls (show details) c26 c27 c28 received calls (save number) c32 c33 c34 c36 c30 c29 select back delete calls calls list received calls voicemail calls missed calls dialled calls options back 02074030201 received calls nush key_soft_1 key_soft_1 c35 mama select back save...

  • Page 54

    Calls list (cont.) dialled calls (show details) c52 c53 c54 dialled calls (save number) c58 c59 c60 c62 c56 c55 select back delete calls calls list received calls voicemail calls missed calls dialled calls options back 02074030201 nush key_soft_1 key_soft_1 c61 mama select back save number delete ca...

  • Page 55

    Calls list (cont.) voicemail calls (show details) c78 c79 c80 voicemail calls (save number) c84 c85 c86 c88 c82 c81 select back delete calls calls list received calls voicemail calls missed calls dialled calls options back 3105 31089 key_soft_1 key_soft_1 c87 31083 select back save number delete cal...

  • Page 56

    Calls list (cont.) delete calls (received calls) c102 c103 c104 options back delete calls received calls key_soft_1 yes no all calls received calls voicemail calls missed calls dialled calls delete all calls ? C105 received calls key_soft_1 all calls deleted go to c102 delete calls (dialled calls) c...

  • Page 57

    1 . When a vmwi call arrive s with name and number the entry is stored in missed and voicemail calls list. If voicemail calls list is disabled the entry will be stored in the missed calls list. The handset will display the name or number if available. If the user prefers that it displays " voicemail...

  • Page 58

    1 . This feature " area code " is added to set base menu and can be hidden in eep r o m . 2 . For the are code, the maximum code length is 3 digits and cannot be set to . If the user attempts to save an area code that is less than 3 digits or , the handset will emit an error beep. 3 . When this feat...

  • Page 59

    Reminders > select back reminders add event (silent) r0 r1 select back add entry reminders key_soft_1 r2 key_soft_1 save back add event subject: abc _ r3 key_soft_1 save clear add event subject: abc 10 mum's birthday_ r4 save back add event r5 enter date: 12/22/06 enter time: 23:59 save back add eve...

  • Page 60

    Show details r24 options back conference call reminders pay visa bill key_soft_1 r25 select back add event reminders edit event show details send as a text delete event key_down r26 select back add event reminders edit event show details send as a text delete event r27 back conference call 12/21 10:...

  • Page 61

    Reminders (cont.) delete all events r52 options back conference call reminders pay visa bill key_soft_1 r53 select back add event reminders edit event show details send as a text delete event key_up r54 select back reminders delete all events key_soft_1 r55 yes no reminders delete all event s? Key_s...

  • Page 62

    Useful numbers > select back useful numbers add/edit entry u0 u1 options back empty useful numbers key_soft_1 key_soft_1 empty empty empty empty u2 select back show details useful numbers key_down edit entry delete entry delete all u3 select back show details useful numbers key_soft_1 edit entry del...

  • Page 63

    1 . Users can store up to 22 entries in useful numbers depending on the eeprom s iz e u s e d . 2 . Each useful number name field can store up to 12 characters and 24 digits for the number field. 3 . Useful numbers entries are stored in the handset. 4 . When viewing useful numbers list - use key_up ...

  • Page 64

    1 . Date and time information is held on both handset and base. 2 . If the base loses its power, any available handset with the latest time will update the base clock when the base power comes bac k o n . 3 . If the handset loses its power and the date and time information is reset, once it has powe...

  • Page 65

    Handset settings select back set handset settings set base ringtone (external call) h0 select back ringtone set handset receiver volume language ringer volume handset name key_soft_1 h1 select back external call ringtone internal call key_soft_1 h2 select back ringtone 1 external call ringtone 3 rin...

  • Page 66

    Handset settings (cont.) wallpaper h31 select back wallpaper set handset receiver volume language ringer volume handset name h32 view back butterfly wallpaper island key_soft_1 h33 use back key_soft_1 h34 h35 key_down go to h31 menu colour h37 h38 h39 h40 h41 sunset use back saved wallpaper key_soft...

  • Page 67

    Handset settings (cont.) key beep h60 h61 select back off key beep on key_soft_1 h62 key_soft_1 go to h60 redial length h65 h66 h67 h68 h69 set to off key beep pabx access code select back wallpaper set handset key beep auto talk menu colour screensaver h64 h63 set to on key beep select back long re...

  • Page 68

    1 . There are 10 (8 channel polyphonic) handset ringtones and these are stored in flash. 2 . When changing the handset ringtone, if a different ringtone is highlighted, a sample of the ringtone begins to play and loops at the handset at the current volume setting (or minimum volume if the volume is ...

  • Page 69

    Base settings ringtone b0 b1 b2 ringer volume b5 b6 b7 b8 b9 dialling mode b4 b3 select back set handset settings set base select back ringtone set base dialling mode first ring ringer volume ring priority key_soft_1 select back ringtone 1 ringtone ringtone 3 ringtone 5 ringtone 2 ringtone 4 rington...

  • Page 70

    Base settings (cont.) first ring b32 b33 b34 system pin b37 b38 b39 b41 b36 b35 select back first ring set base dialling mode recall mode ringer volume ring priority select back off first ring on set to off first ring key_soft_1 go to b32 key_soft_1 set to on first ring or select back first ring set...

  • Page 71

    1 . Base ringtone and ringer volume menus can be hidden in e e p r o m . 2 . There are 5 (monophonic) base ringtones and these are stored in rom. 3 . When changing the base ringtone, if a different ringtone is highlighted, a sample of the ringtone begins to play and loops at the base at the current ...

  • Page 72

    Registration register additional handset y0 key_soft_1 menu contact please register key_up > select back registration y1 key_soft_1 select back register handset registration select base key_soft_1 y2 de-register select back base 1 select base base 2 key_soft_1 y3 base 3 base 4 y4 ok back base 1 ente...

  • Page 73

    De-register handset y25 key_soft_1 menu contact handset 1 key_up > select back registration y26 key_soft_1 select back register handset registration select base key_down y27 de-register y28 select back register handset registration select base key_soft_1 de-register y29 ok back de-register enter sys...