X1000 first time set-up ///.
2 i first time set-up /// there are two basic steps to the first time set up: 1. Registering your gateway with the website. 2. Discover devices and register with the gateway. Click ‘next’ to begin step 1. To register your gateway with the website, you will need the user name and registration token. ...
4 3 automatic detection of panasonic ip cameras on your lan: to discover new panasonic ip cameras you have to: 1. Reset the camera to factory defaults by pushing the reset button at the bottom of the camera. 2. Disconnect and reconnect back power to the camera after the reset operation. 3. Click ‘ c...
6 5 the message will disappear about 30 seconds after the refresh is complete. Click on the name of the device to change settings and configurations. See device setup for more instructions. Base unit: you will have the options of arming or disarming all devices. Once you select the time frame parame...
8 7 information such as registered user name, the ability to un-register your gateway, and editing temperature preferences are presented here. ■ to un-register your gateway: click ‘remove from service’. ■ to change the temperature preferences from fahrenheit to celsius: select the desired preference...
Users may clear this log by selected the ‘clear log’ button. Old information will be cleared. The next event trigged will appear in the event log. Safety, regulatory, & software license information /// fcc id number: ou4-xg1000 / ic: 4576a caution changes or modifications not expressly approved by x...
