1. DL manuals
  2. Xantech
  3. Accessories
  4. 380-20
  5. Installation Instructions

Xantech 380-20 Installation Instructions

Other manuals for 380-20: Datasheet

Summary of 380-20

  • Page 1

    - 1 - installation instructions 380-20 single gang, j-box, blast-ir™ emitter description the 380-20 j-box blast-ir™ contains three high-intensity infrared leds housed in a metal enclosure that can easily be mounted inside a standard, single gang, j-box electrical receptacle. The benefit of the 380-2...

  • Page 2

    - 2 - installation the 380-20 is intended to be wired to the terminals of any xantech connecting block such as the cb12 and 789-44. Use 3 or 4 conductor cable, as specific above, to run between the connecting block and the 380-20. The conductor cable will be used to connect the +12vdc, ir bus, and g...

  • Page 3

    - 3 - adding ir attenuators in the event that the infrared (ir) signal is judged to be too intense, apply the included ir attenuators (white discs). The ir attenuators are to be placed between the 380-20 led and the lens on the decora ® style insert. Simply place the white disc between the light blu...

  • Page 4

    - 4 - repairs: technical support pre-authorization certain products require a pre-authorization from our technical support department prior to a return authorization (ra) being issued. Please call our technical support department at 800 843-5465 extension 301 if you have a problem with any of the fo...