1. DL manuals
  2. Xantech
  3. Accessories
  4. 390-20
  5. Installation Instructions

Xantech 390-20 Installation Instructions

Summary of 390-20

  • Page 1

    - 1 - installation instructions 390-20 shelf-top, blast-ir emitter description the 390-20 blast-ir contains three high-intensity infrared leds housed in a small shelf-top assembly. The benefit of the 390-20 is that it can “flood” an enclosed area with an infrared signal. The 390-20 comes with a scre...

  • Page 2

    - 2 - installation - external ir receiver (figure 1 below) the easiest installation is to use the 390-20 with an external xantech ir receiver. Xantech ir receiver’s have 3 connections, +12vdc power, ir out, and ground. Step 1: connect the 3 wires from the xantech ir receiver to the 3-pin screw termi...

  • Page 3

    - 3 - while it is possible to make wired connections without a xantech connecting block, it is not recommended. The xantech connecting block reduces installation time, helps to eliminate errors, allows easy troubleshooting and permits easy system upgrades later, if needed. Figure 2 power supply it i...

  • Page 4

    - 4 - repairs: technical support pre-authorization certain products require a pre-authorization from our technical support department prior to a return authorization (ra) being issued. Please call our technical support department at 800 843-5465 extension 301 if you have a problem with any of the fo...