Rev description date approved 12950 bradley avenue sylmar ca 91342-3829 phone: 818.362.0353 fax: 818.362.9506 drawn date cog. Engineer date checked date title scale size drawing no. Rev. File name sheet of corporation 1 final part and finished sized artwork tolerance: ± .040 ± .125 ± mfg. Process:...
08905076a - 1 - installation instructions cmd, kmd, mmd designer series keypad module description perhaps the easiest way to become familiar with the smartpad3 is to gain an understanding of the modules that make up the system. The designer series modules are divided into two basic grounds: the key ...
08905076a - 2 - installation 1. First, decide on the button labels you need and their locations. 2. Pick up the key module pcb & base assembly and carefully place each button label onto the rubber actuators in the location you desire. 3. When the button labels are completely in place, place the clea...
08905076a - 3 - disassembly you may find it necessary, from time to time, to disable the key module to change buttons for system updates, etc. Proceed as follows: 1. Remove the key module from the pm110 or lm110 or em110 by pulling upward at the 18-pin connector end of the module. 2. Grasp the key m...
08905076a - 4 - xantech corporation 13100 telfair avenue, 2/f sylmar, ca 91342 phone: (818) 362-0353, fax: (818) 362-9506 instructions, cmd, kmd, mmd © 2007 xantech corporation this document is copyright protected. No part of this manual may be copied or reproduced in any form without prior written ...
