Xantech CPLTCX Installation Instructions

08905095A 

  - 

1 

- 

INSTALLATION INSTRUCTIONS 

CPLTCX 

Optical to Coaxial Digital Audio Coupler 

DESCRIPTION 

Xantech’s digital audio signal converter is an easy to install, clean approach to converting S/PDIF 

digital audio signals from optical to coaxial format. Combine with the Xantech Coaxial to Optical 

Digital Audio Coupler (CPLCT)* to provide a long distance alternative using lower cost coaxial cable 

instead of optical cable. 

You will need an EIAJ optical cable (Toslink)* and a coaxial cable* with RCA style ends. The length 

should be based on your application.  

* sold separately  

SPECIFICATIONS 

ƒ  Power supply, 6VDC, 200mA (included) 

ƒ  Size: 2-1/4” (W) x 3-1/4” (L) x 7/8” (H) 

INSTALLATION 

[1] Connect one end of the optical cable (Toslink) to the output port on the source component (DVD, 

CD player, etc.). Connect the opposite end to the CPLTCX device. 

[2] Connect one end of the coaxial cable to the input port (Digital receiver, digital audio distribution 

device). Connect the opposite end to the CPLTCX device.  

[3] Connect the power supply to the CPLTCX. A red pilot indicates the CPLTCX is active for use.