Xantech D5RH Installation Instructions Manual - page 25
Other manuals for D5RH:
Quick Connection Manual
Manual is about: DIGI-5 DDS Digital Distribution System Rack Mount 4 Source, 4 Zone Hub
of
32
08905153A
-
25
-
IR OUT
Connect a standard IR Emitter (283D emitter, for example) from the IR OUT port on the front of the
D5IP to the IR receiver on the front of the audio source (see Figure 3.14). For sources that have an
IR Input port on the back of the unit, use a 3.5mm to 3.5mm mono interconnect cable instead (see
Figure 3.14).
Figure 3.14: IR Out to Source Connections