Xantech D5SH Installation Instructions Manual - page 13
Other manuals for D5SH:
Quick Connection Manual
Manual is about: DIGI-5 DDS Digital Distribution System Structured Wiring, Single Source, 4 Zone Hub
of
20
-
13
-
IR OUT
Connect a standard IR Emitter (283D emitter, for example) from the IR OUT port on the front of the
D5IP to the IR receiver on the front of the audio source (see Figure 3.4). For sources that have an IR
Input port on the back of the unit, use a 3.5mm to 3.5mm mono interconnect cable instead (see
Figure 3.4).
Figure 3.4: IR Out to Source Connections