1. DL manuals
  2. Xantech
  3. Switch
  4. DCH4
  5. Installation Instructions Manual

Xantech DCH4 Installation Instructions Manual

Manual is about: Doorbell Communicator Hub

Summary of DCH4

  • Page 1

    08905107c - 1 - installation instructions dch4 doorbell communicator hub description the dch4 is a doorbell communicator hub that provides keyless entry control with the mrc88ctl. The dch4 has the ability to answer and open up to 4 doors or gates from the nearest phone. When combined with the dpc100...

  • Page 2

    08905107c - 2 - 1. Power supply connection. Be sure to use the included power supply only. 2. C.O. / phone line input. If installing without a c.O. Line, “*5” must be programmed. 3. Entry phone input. 4. Line out to phones. Can be connected to an unused line / trunk input on a phone system. 5. Door ...

  • Page 3

    08905107c - 3 - programming a. Accessing programming 1. Accessing the programming mode with a security code step 1. Come off-hook with any house phone (device) connected to terminals 4 & 5, line out to phones. Step 2. Enter *# followed by the 6-digit security code (factory set to 845464). Step 3. A ...

  • Page 4

    08905107c - 4 - b. Quick programming features enter digits - then - memory location privacy number (factory disabled) 0-6 digits (0-9) + #00 entry phone 1 keyless entry codes (factory disabled) 4-6 digits (0-9) + #11 - #16 * entry phone 1 one time use keyless entry codes (factory disabled) 4-6 digit...

  • Page 5

    08905107c - 5 - c. Security code this six digit number can be used to access the programming mode. The security code has been factory set to 845464. It is recommended that you change the security code to a personal 6 digit number. To change the security code, access programming (see programming sect...

  • Page 6

    08905107c - 6 - g. Door strike activation time a single pole double throw relay is available for each entry phone (a second set of contacts are available on solder pads only), and each may be programmed with its own “doorstrike” activation time (programmed in seconds). Each time must be 2 digits (ex...

  • Page 7

    08905107c - 7 - there is only one entry phone on the dch4. Program the dch4 with “0#62 ”(disable entry phone ringing). When the doorbell chimes, picking up a house phone will instantly connect the house phone to the entry phone. If the user presses the doorbell switch again while their call is eithe...

  • Page 8

    08905107c - 8 - operation a. Visitors when a visitor presses the call button (comes off-hook) on the entry phone, the dch4 will begin ringing the house phones and “caller id” information is sent. If a house phone is on a c.O. Call, call waiting tones and “call waiting caller id” information is sent....

  • Page 9

    08905107c - 9 - d. Privacy number the privacy number feature is useful for preventing unwanted (prank) entry phone calls from visitors. If a privacy number has been programmed, an off hook entry phone is given 4 seconds of dial tone to allow the visitor to enter the privacy number. If the visitor en...

  • Page 10

    08905107c - 10 - fcc requirements this equipment complies with part 68 of the fcc rules and the requirements adopted by the acta. On the side of this equipment is a label that contains, among other information, a product identifier in the format us:aaaeq##txxxx. If requested, this number must be pro...