Xantech HDMIC5IR Installation Instructions

Page of 4

Download

Bookmark us

08905144A

INSTALLATION INSTRUCTIONS

HDMIC5IR

Point to Point HDMI & IR /CAT5 Balun Extender

INTRODUCTION

The HDMIC5IR extends your HDTV display up to 120 feet away from your HDTV source using two

CAT-5 cables. It is equipped with HDMI™ (high definition multimedia interface) connectors and is

capable of supporting DVI (digital visual interface) equipment when used with a HDMI to DVI Adapter,

providing greater flexibility and options when integrating several home theater components.

FEATURES

• Extends high definition displays up to 120 feet (35 meters) from the source at 1080i

• Extends high definition displays up to 70 feet (21 meters) from the source at 1080p

• Improved automatic compensation for cable skew and delay

• Eliminates equipment noise in the viewing environment

• Supports resolutions up to 1080p, 1080i, 720p, 720i, 480p, 480i

• Audio and video are transmitted digitally over the CAT-5e cable for zero signal loss

•

IR send and receive over CAT-5e

•

CAT-5e or CAT-6 cable acceptable

• HDMI™ 1.3 compatible

• HDCP compliant

GENERAL INFO

• (1) 100-240V Power Supplies: 12VDC, 6W max. (included)

• Dimensions: 3.43"W x 2.40"D x 1.14"H

Page 1
08905144a - 1 - installation instructions hdmic5ir point to point hdmi & ir /cat5 balun extender introduction the hdmic5ir extends your hdtv display up to 120 feet away from your hdtv source using two cat-5 cables. It is equipped with hdmi™ (high definition multimedia interface) connectors and is ca...
Page 2
08905144a - 2 - installation note(s) • warning: to be installed and/or used in accordance with appropriate electrical codes and regulations. If you are not sure about any part of these instructions, consult a qualified electrician. • caution: do not install this product in an electrical junction box...
Page 3
08905144a - 3 - application the figure above shows a common installation where the hdmic5ir is used to deliver entertainment content to another room. Using cat5 cabling, the source component can be located in a remote location. The source component can be controlled using an ir receiver. The ir conn...
Page 4
08905144a - 4 - warranty xantech warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and xantech is notified within two (2) years from the date of shipment, xantech will, at its option, repair or replace the equipment...