Xantech URC-1 Operating Instructions

Summary of URC-1

  • Page 1

    1 controllers operating instructions urc-1 programmable remote controller fig. 2 fig. 3 "learning" ir window "sending" ir window bank switch fig. 1 learn button learn led ir led general the urc-1 is a highly versatile learning remote, capable of storing up to 32 commands on each of 4 layers. Layers ...

  • Page 2

    2 6. Using your other hand, press and release the desired key of the "teaching" remote. The learn led will start blinking. When the command has been learned, the ir led will go on. 7. Release the button on the urc-1. 8. Repeat steps 4, 5 and 6 for all commands you wish the urc-1 to learn. 9. If no o...

  • Page 3

    3 controllers fig. 4 sequence button urc1 error led and extended memory some remote control codes require more memory than is normally allocated by the urc-1. When you try to learn these codes, the learn led will blink in the normal manner, but will be followed by the error led lighting up. If this ...

  • Page 4

    4 execution times • some components will not execute consecutive commands quickly, particularly after a power on command. • we therefore suggest that commands, such as power on and play on the same component, be separated by one or more commands of different components, so more time is given between...

  • Page 5

    5 controllers 9/12/95 fig. 5 reset button reset troubleshooting tips batteries • the urc-1 most easily learns commands from other remote controls when they have strong batteries. As the teaching remote controller battery weakens, the strength of it's signal weakens -- making it more difficult for th...