Xantech XSSD2100W Installation Instructions Manual
08905088B
-
1
-
INSTALLATION INSTRUCTIONS
XSSD2100W
100Watt, Speaker Selector, Decora
A/B Speaker Selector, A/B Source Selector
DESCRIPTION
The XSSD2100W provides an easy-to-use, easy-to-install, A/B or A+B speaker selector switch. It is
also a A/B source selector switch. Premium components are used to provide high-quality speaker or
amplifier selection. The XSSD2100W requires no external power source. The XSSD2100W cannot be
used with high power bridged amplifiers.
SPECIFICATIONS
Source input selectable, A or B switches
Speaker output selectable, A or B or A+B switches
Dimensions: 1.65” W x 4.0” H x 1.5” D
Screw terminal connectors used with 16 to 22 AWG wiring.
Rotary style switch
INSTRUCTIONS (Without Volume Control)
1) Remove ¼” of insulation from the ends of the wires.
2) Connect the following wires together. It is recommend to use the appropriate wire caps.
a. White to Yellow.
b. Gray to Orange.
c. Purple to Red.
d. Green to Brown.
3) Connect the two sources according to the chart below:
Source “1”
Screw Terminal
Source “2”
Screw Terminal
Right +
2
Right +
1
Right –
3
Right –
3
Left –
4
Left –
4
Left +
6
Left +
5
4) Connect the two speaker pairs according to the chart below:
Speaker “A”
Screw Terminal
Speaker “B”
Screw Terminal
Right +
9
Right +
8
Right –
7
Right –
7
Left –
12
Left –
12
Left +
11
Left +
10