Xantrex 40 A Owner's Manual - Main Components

Manual is about: AC to DC Converter

Summary of 40 A

  • Page 1

    Xantrex ac to dc converter manual type 40 a (xadc-40) 60 a (xadc-60) 80 a (xadc-80) owner’s guide towable-oem-40-60-80a.Book page i monday, march 5, 2007 12:15 pm.

  • Page 2

    Towable-oem-40-60-80a.Book page ii monday, march 5, 2007 12:15 pm.

  • Page 3: Xantrex Ac to Dc

    Xantrex ac to dc converter owner’s guide towable-oem-40-60-80a.Book page i monday, march 5, 2007 12:15 pm.

  • Page 4

    About xantrex xantrex technology inc. Is a world-leading supplier of advanced power electronics and controls with products from 50 watt mobile units to one mw utility-scale systems for wind, solar, batteries, fuel cells, microturbines, and backup power applications in both grid-connected and stand-a...

  • Page 5: About This Guide

    Iii about this guide purpose the purpose of this owner’s guide is to provide explanations and procedures for operating and troubleshooting the xantrex ac to dc converter (xadc). Scope the guide provides information about operating and troubleshooting the unit. Audience the guide is intended for anyo...

  • Page 6: Conventions Used

    About this guide iv 975-0305-01-01 conventions used the following conventions are used in this guide. This guide contains information for three versions of the xantrex ac to dc converter. The 40 amp xantrex ac to dc converter will be referred to as the xadc-40 when it is being referenced individuall...

  • Page 7

    V important safety instructions 1. Before using the xadc, read all instructions and cautionary markings on the xadc, the batteries, and all appropriate sections of this guide. 2. Do not expose the xadc to rain, snow, spray, or water. To reduce risk of fire hazard, do not cover or obstruct the ventil...

  • Page 8

    Safety vi 975-0305-01-01 precautions when working with batteries 1. Follow all instructions published by the battery manufacturer and the manufacturer of the equipment in which the battery is installed. Working in the vicinity of batteries may be dangerous. Batteries generate explosive gases during ...

  • Page 9: Fcc Information to The User

    Safety 975-0305-01-01 vii 10. If you need to remove a battery, always remove the ground terminal from the battery first. Make sure all accessories are off so you don’t cause a spark. 11. Use the xadc for charging a lead-acid battery only. Do not use the xadc to charge nickel-cadmium or dry-cell batt...

  • Page 10: Contents

    Viii important safety instructions - - - - - - - - - - - - - - - - - - - - v 1 features introduction- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 special features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 main components - - - - - - - - - - -...

  • Page 11: Features

    1 1 features introduction the xantrex ac to dc converter (xadc) is a family of converter/chargers, consisting of 40a (xadc-40), 60a (xadc-60), and 80a (xadc-80) units. All xadc units will accept a broad range of 120 vac input power and convert it into a 3-step dc charge algorithm designed for use wi...

  • Page 12: Main Components

    2 975-0305-01-01 main components figure 1-1 shows the main components of the xadc. Optional ac/dc distribution panel the xadc may be pre-installed with an ac/dc distribution panel. The panel is available in two configurations which provides the approved wiring boxes for ac and dc connections: 30a (p...

  • Page 13

    Main components 975-0305-01-01 3 figure 1-2 ac/dc distribution panel components item description 1 dc fuse/ac breaker access panel (swings open with thumb latch) 2 removable dc fuse access panel with dc circuit designation label. 3 removable ac/dc distribution panel faceplate (service technician onl...

  • Page 14

    4 towable-oem-40-60-80a.Book page 4 monday, march 5, 2007 12:15 pm.

  • Page 15: Operation and

    5 2 operation and troubleshooting switching the xadc on and off the xadc is always on when ac voltage is applied. To switch the xadc off, disconnect the ac input voltage by turning the ac breaker off. Maintenance it may be necessary to replace the dc fuses in the xadc. Fuses for xadc should be: if t...

  • Page 16: Troubleshooting Reference

    6 975-0305-01-01 troubleshooting reference warning: electric shock hazard do not remove the cover of the xadc or disassemble the xadc. The xadc does not contain any internal user-serviceable parts and attempting to service the unit yourself could result in electrical shock or burn and will also void...

  • Page 17: Specifications

    7 a specifications specifications are subject to change without notice. Mechanical specifications electrical performance physical specifications xadc-40 xadc-60 xadc-80 weight 7.9 lb (3.6 kg) 8.2 lb (3.7 kg) 8.3 lb (3.8 kg) operating temperature range 14 ºf – 86 ºf (-10 ºc – 30 ºc) de-rated 86 ºf – ...

  • Page 18

    8 975-0305-01-01 warranty and return information if your vehicle is within its factory warranty period: the warranty for this product is covered under your vehicle's express warranty, please contact your vehicle manufacturer's owner services department for technical support and warranty service. If ...

  • Page 19

    Towable-oem-40-60-80a.Book page 9 monday, march 5, 2007 12:15 pm.

  • Page 20

    Xantrex technology inc. Www.Xantrex.Com 975-0305-01-01 printed in china towable-oem-40-60-80a.Book page 10 monday, march 5, 2007 12:15 pm.