Xantrex PROwatt 1000 Owner's Manual - Installing The Xpower 1000
Installing the XPower 1000
975-0127-01-01
3–9
Installing the XPower 1000
Do not proceed with the installation of your XPower 1000 until you have
read the section, “Designing Your Installation” on page 3–1. The more
thorough your planning, the better your power needs will be met to
achieve maximum performance from your XPower 1000.
Safety Instructions
Before you start to install the XPower 1000:
•
Review the “Important Safety Instructions” on page v.
•
Do not attempt your own AC wiring unless you have the knowledge,
tools, and experience to do a safe job. A licensed electrician can
install the inverter if you do not wish to do your own wiring.
•
Read and follow all Warnings and Cautions in this chapter.
Installation Tools and Materials
Tools
•
Wire stripper
•
Wrench for DC terminals
•
Screwdrivers
•
Crimping tool for fastening lugs and terminals on DC cables.
(You may find it more convenient to have the crimp connectors
installed onto the DC cable by the store that sells you the cable and/or
connectors.)
Important:
If you have any installtion questions or issues, please contact
Customer Service. Contact information is available in “Warranty” on page WA–1.