Xantrex RM1012 Owner's Manual - Checking Terminals
Manual is about: Heavy Duty Inverter/Charger 1000 Watt Weatherproof For Volvo Trucks
of
48
Maintenance
3–2
Checking terminals
To check that the battery cables are firmly connected, you will need to
remove the terminal caps.
To remove the terminal cap:
1. Using a flathead screwdriver as shown in
, place the blade
in the lip of the cap and push it gently against the cap until it lifts off.
2. To replace the cap, place it over the terminal and push down until it
snaps into place.
Figure 3-1
Lifting the terminal cap
1
2
3