Summary of Single Line
Page 1
Single line telephone user guide.
Page 3
© copyright 2006 we reserves the right to make changes in specifications at any time without notice. All of the infor- mation in this document is believed to be accurate and reliable, but is not warranted to be true in all cases. Record of revision release date version supersedes description march 2...
Page 4: Toc
Iv toc introduction .....................................................................................................................................1 feature codes..................................................................................................................................2 ...
Page 5: Toc
V toc.
Page 6
1 1 single line telephone user guide introduction single line or analog telephones, like you use at home, have not changed significantly in many years. Generally, analog telephones are basic in design and have very few features. However, when attached to a business pbx system, like this one, you wil...
Page 7
Single line telephone user guide 2 1 feature codes feature codes may be dialed at the time of operation. In several cases, the “flash” button or hook-switch flash must be pressed, which allows the system to give the slt new dial tone, and access to additional features. Table 1.1 telephone feature co...
Page 8
3 single line telephone user guide 1 call pickup group different group 410 ~ 417 page 10 call pickup same group * page 10 camp on (busy co line) # page 10 camp on (busy extension) ext + 4 page 10 co line access 9 page 11 conference flash + 3 page 11 conference room (meet me) 860 ~ 867 page 11 defaul...
Page 9
Single line telephone user guide 4 accessing specific co lines 1 feature code operation accessing specific co lines #0(x) to access an available line, dial 9 or to access a specific line or dial # followed by 0(x), where (x) = the line 1 - 9. This allows both single line and digital key telephones t...
Page 10
5 single line telephone user guide authori ty code ( tr av eling c lass of service ) 1 description slt extension users can activate an alarm, or wake up call, on their telephone to remind them of special appointments, events, etc. When the alarm activates, the telephone will begin ringing. After the...
Page 11
Single line telephone user guide 6 au tomatic selection (co/i nter com) 1 automatic selection (co/intercom) #95 this feature automatically selects a specific outside line or intercom (icm) when the hand- set or the speakerphone button is pressed. A line will not be accessed automatically when a tele...
Page 12
7 single line telephone user guide call bac k – ex ten sion 1 the extension that is programmed as the attendant may receive multiple internal calls via the operator code “0”. Conditions: 1. The operator code (0) is in addition to the default assigned two-digit intercom num- ber for the extension. 2....
Page 13
Single line telephone user guide 8 call f orw ar d extension 1 call forward extension #2 there are several call forward options to choice from, so that each extension user can cus- tomize their own call forwarding. • busy - forwards calls only when the extension is busy. • busy/no answer - forwards ...
Page 14
9 single line telephone user guide cal l p ark 1 conditions: 1. When an extension that is forwarded goes off hook, you will hear stutter dial tone. Call park #73 + pkl (pkl = park location 101-148) all extensions have a call park location, which is a special dial code location that places calls into...
Page 15
Single line telephone user guide 10 call pickup 1 while on a co line call, press flash and then dial #73 + pkl (pkl = park location (101- 148). A confirmation will be heard. Pickup a parked call from a different extension - from intercom dial tone, dial #73 + pkl (pkl = park loca- tion (101-148). Yo...
Page 16
11 single line telephone user guide conf er ence 1 extension becomes idle, it will ring, and when that extension is answered, the extension that sent the “camp on” will also begin ringing. Conference single line extensions can establish a conference with one internal and one external, or two interna...
Page 17
Single line telephone user guide 12 def ault set 1 co lines may be programmed into one of 8 line groups, and are automatically entered into ling group 1. To access an idle co line, in line group 1, go off hook and dial 9. Use the fol- lowing line group access codes to access co lines. Conditions: n/...
Page 18
13 single line telephone user guide do n ot d istu rb 1 •busy ring = yes •auto line select = null (none) •hotline = null (none) do not disturb #4 extension users may, have the ability to place their extension in do not disturb. When invoked, do not disturb (dnd) prevents all calls, intercom or co li...
Page 19
Single line telephone user guide 14 ex ten sion r eminder 1 extension pickup groups allow you to dial a code and pickup an actively ringing call within your group. Conditions 1. Extensions may be assigned to only one extension pickup group. 2. The pickup priority of a ringing call is: co lines and t...
Page 20
15 single line telephone user guide gr oup call pickup 1 group call pickup #54 see “call pickup” on page 10. Hotline #9* the hotline feature - also called off hook preference or prime line pickup - allows the user to access an extension or system dial directory number simply by going off hook. Loca-...
Page 21
Single line telephone user guide 16 least c ost ro uting 1 2. Lnr will repeat a hook-flash in the same sequence as it was first dialed. If a speed dial number was first dialed lnr will dial the speed dial number and any subsequent manually dialed digits. Least cost routing #88 least cost routing all...
Page 22
17 single line telephone user guide pa ge (meet me) 1 conditions: 1. Only one page will work at a time, if a second page is attempted, error tone is heard. 2. Single line telephone may initiate a page, and use the meet me page feature, but they will not receive a page announcement. Page (meet me) #5...
Page 23
Single line telephone user guide 18 pulse to to ne (d tmf) con version 1 pulse to tone (dtmf) conversion * the pulse to touch tone (dtmf) conversion feature enables the system to use dial pulse (rotary) outgoing telephone company lines and access special services which require dtmf tones. A limited ...
Page 24
19 single line telephone user guide single line t elephone - fl ash 1 conditions: 1. Once a digit is dialed the reminder tone is removed until the next time intercom dial tone is heard. Single line telephone - flash single line telephones and similar analog devices uses a hook-switch flash or flash ...
Page 25
Single line telephone user guide 20 tr an sfe r 1 2. The system can be programmed to allow system speed dial numbers to override toll restriction settings both co line and extension classes of service. Transfer transfer is used to deliver calls at one extension, to another extension while maintainin...
Page 26
21 single line telephone user guide w arn in g to ne / co line cal l limit er 1 5. In screened transfer, if the destination extension answers the intercom call in voice announce hands-free mode and does not go off hook, the transferred connection will transfer ring at that extension. 6. In screened ...
Page 27
Single line telephone user guide 22 w arning to ne / co line cal l limiter 1.
Page 28
A access specific co line 2 account code 2, 4 alarm /wake up 2 alarm/wake up cancel 2 attendant 2 authority code 5, 13 authority code (traveling cos) 2 automatic selection 2, 6 b busy forward 8 c call park location 9 call back 2, 7 call forward 2, 13, 18 busy 8 busy/no answer 8 co line only 8 direct...
Page 29
Phone lock/unlock 17 pickup groups 14 prime line pickup 15 pulse to tone 3 pulse to touch tone 18 r recall 14, 18 hold 18 parked calls 18 transfer 18 reminder tone 18 s screened transfer 20 speed dial bin 15 extension 19 speed dialing (slt) 4 stutter dial tone 18 t transfer 14, 20 traveling class of...
Page 30
© copyrigh 2006.