XCM XFPS PC Magic box 2 Usage Manual - page 9
of
9
Now push the LEFT analog to the RIGHT end. The Status indicator will blink
PURPLE. Press the middle key on the LEFT analog stick and the Status indicator
will turn BLUE. The programming procedure is completed.
How to erase the custom setting.
Press and hold the Programming button for 5 seconds, the Status indicator
2> turns to PURPLE then blinks and finally turns back to its status. Now all the
custom setting (included the setting of swap of 2 analog sticks and the tilt
function) are reset. The controller is back to its default function.
* The XFPS PC Magic Box 2 can be upgraded via further firmware update.