XDream X-Cell Plus Quick Start Manual - page 2
The maximum input voltage of X-Cell is 5V, please read the
specification manual instrution of the adaptor you will use.
Pull out and rotate the locating shaft to
a predetermined position.
Insert your 3.5mm plug into your mobile
device.
Turn up the volume no less than 75%.
Press the Play button on your mobile
device to activate X-Cell and music
will be played in 10 seconds.
X-Cell will shutdown automatically in 60
seconds when you stop the music.
To Play Music
X-Cell does not provide any power cables
for charging devices of any brands and
you can use dedicated power cables provided
by relevant brands.
To Charge Other Devices
Pull out and rotate the locating shaft to
a predetermined position.
Connect the dedicated power cable to
the USB port of X-Cell for charging the
battery of your devices.
When the charging process is started,
the indicator will flicker one by one in
the direction of the arrow.
Power & Capacity Indicator
When out of service for a long period, it is
recommended to retain 30% of power and
charge the battery for every two months.
While there’s a noise when you rotate the
locating shaft, please add a little lube at
both ends of the shaft.
Product Maintenance
Technical Data
3000 mAh
3.7 V
5 V
700 mA
5 V
1000 mA
Battery Specification
Battery capacity:
Battery voltage:
USB input voltage:
USB input current:
USB output voltage:
USB output current:
Speaker Specification
Power output:
Frequency range:
Sensitivity:
Impedance:
1.5 W
200 - 20000 Hz
79 db ± 3
4 Ohm
Not available for any devices without 3.5mm
earphone jack.
It's possible to cause a slight noise due to
electromagnetic distortion while charging
X-Cell and playing music at the same time.
The boot times will be a little difference when
you play different music. Long time Failed to
turn on maybe caused by below three conditions:
1 Run out of battery;
2 Product is damaged;
3 Volume is too low.
Note
Note
Please select the adapter whose input
Voltage match X-Cell’s to charge.
X-Cell does not charge the product whose
output voltage is higher than it.
When it’s low battery. X-Cell will automatically
turan off to protect its battery life.
Please read the instructions carefully before using
X-Cell. The company is not responsible for any
loss of product damages caused by misuse.
Do not place X-Cell in high-temperature
environments, including strong sunlight and fire.
Do not drop or hit X-Cell heavily or
disassemble it.
Do not store X-Cell in a damp area.
Do not use the USB charger cable which is
not supplied by our company to charge your
X-Cell.
Warnings
It is recommended to fully charge the battery
before your first use in order to extend its
standby time.
Children or the elderly should use the product
under guidance.
There will be a rise in temperature of X-Cell in
use and please expose the product in air.
Do not cover X-Cell with any item while it is
operating.
If X-Cell is overheating, swelling or
moisturizing in use or there is any abnormal
conditions, please stop using it immediately.
Charging X-Cell
Charging other device with X-Cell
33% capacity of battery charged
66% capacity of battery charged
100% fully charged
Note