XDrum DD-200DG User Manual - Demo
Demo
Drücken Sie DEMO um den Demosong zu starten oder zu
beenden. Im Display erscheint „dE“. Sie können den Demosong
auch mit Hilfe der START/STOP Taste starten oder beenden.
Reverb
Drücken Sie REVERB um zur Hall-Funktion zu gelangen. Links
im Display erscheint „r“, rechts der eingestellte Wert. Drücken Sie
SELECT + oder - um den Wert zu verändern (0-3, nicht
fortlaufend). Sie können auch das Wahlrad benutzen. Der Wert
wird nach der Einstellung automatisch gespeichert.
Aufnahme
Vorbereitung
Wählen Sie den gewünschten Song, das Drumkit, das Tempo, die Drum Off- und die Reverb-
Einstellungen aus.
Starten der Aufnahme
Drücken Sie REC, das Licht beginnt zu blinken. Drücken Sie START/STOP oder
schlagen Sie auf das Pad. Das Licht hört auf zu blinken und die Aufnahme beginnt.
Stoppen der Aufnahme
Um die Aufnahme zu stoppen, drücken Sie START/STOP oder REC. Die Indikatorlampe für
Record geht aus. Wenn der Speicher voll ist, erscheint „FL“ auf dem Display und die Aufnahme
stoppt automatisch.
Bitte beachten Sie: Wenn Sie mit der Aufnahme beginnen, läuft
auch das Metronom mit. Der Sound des Metronoms wird jedoch
nicht mit aufgenommen. Um das Metronom auszuschalten,
drücken Sie CLICK.
Playback
Drücken Sie PLAY/STOP um die Wiedergabe des aufgenommenen Songs zu starten
oder zu beenden.
Bitte beachten Sie: Wenn Sie einen neuen Song aufnehmen, wird der vorherige
ersetzt. Wenn Sie den Strom abschalten, gehen die aufgenommenen Song-Daten
verloren.
12
10
Operation
Reverb
Record
Press [REVERB] button to enter reverb function. In this
menu, the digit on far left of LED will display letter “R”.
The two digits on the right will display current reverb level.
The button
can be used to adjust the
reverb level (0-3, not loop). This value will be auto-saved
after adjusted.
SELECT [+] / [ ]-
Prepare to Record
Select the desired song, drum kit, tempo, drum off
setting, and reverb settings.
Start Recording
Press the [REC] button, the light start flashing.
Press the [START/STOP] button or strike the pad, the
light stop flashing and the recording process starts.
Stop Recording
To stop recording, press the [START/STOP] button or
[REC] button. The record indicator will turn off. If the
memory is
full, "FL" will appear on the display and
recording process
stops automatically.
Note: When you start recor ding, the vocal m etronome also
starts to count. But the sound of the vocal will not be record.
To stop the metronome, press the [CLICK] button.
Playback
Press the [PLAY
/STOP] button will start or stop playing
recorded song.
Note: When you record a new song, it will replace the
previous recording. The song data recorded will be lost when
you turn off the power.
Demo
Press [DEMO] button to start or stop demo song
playing. The 3-digit LED will display “dE” , you can also
press [START/STOP] button to stop demo song playing.
0
5
25
75
95
100
AW_DD315_Manual_G08_150901
2015
9
2
15:38:18
10
Operation
Reverb
Record
Press [REVERB] button to enter reverb function. In this
menu, the digit on far left of LED will display letter “R”.
The two digits on the right will display current reverb level.
The button
can be used to adjust the
reverb level (0-3, not loop). This value will be auto-saved
after adjusted.
SELECT [+] / [ ]-
Prepare to Record
Select the desired song, drum kit, tempo, drum off
setting, and reverb settings.
Start Recording
Press the [REC] button, the light start flashing.
Press the [START/STOP] button or strike the pad, the
light stop flashing and the recording process starts.
Stop Recording
To stop recording, press the [START/STOP] button or
[REC] button. The record indicator will turn off. If the
memory is
full, "FL" will appear on the display and
recording process
stops automatically.
Note: When you start recor ding, the vocal m etronome also
starts to count. But the sound of the vocal will not be record.
To stop the metronome, press the [CLICK] button.
Playback
Press the [PLAY
/STOP] button will start or stop playing
recorded song.
Note: When you record a new song, it will replace the
previous recording. The song data recorded will be lost when
you turn off the power.
Demo
Press [DEMO] button to start or stop demo song
playing. The 3-digit LED will display “dE” , you can also
press [START/STOP] button to stop demo song playing.
0
5
25
75
95
100
AW_DD315_Manual_G08_150901
2015
9
2
15:38:18
10
Operation
Reverb
Record
Press [REVERB] button to enter reverb function. In this
menu, the digit on far left of LED will display letter “R”.
The two digits on the right will display current reverb level.
The button
can be used to adjust the
reverb level (0-3, not loop). This value will be auto-saved
after adjusted.
SELECT [+] / [ ]-
Prepare to Record
Select the desired song, drum kit, tempo, drum off
setting, and reverb settings.
Start Recording
Press the [REC] button, the light start flashing.
Press the [START/STOP] button or strike the pad, the
light stop flashing and the recording process starts.
Stop Recording
To stop recording, press the [START/STOP] button or
[REC] button. The record indicator will turn off. If the
memory is full, "FL" will appear on the display and
recording process
stops automatically.
Note: When you start recor ding, the vocal m etronome also
starts to count. But the sound of the vocal will not be record.
To stop the metronome, press the [CLICK] button.
Playback
Press the [PLAY
/STOP] button will start or stop playing
recorded song.
Note: When you record a new song, it will replace the
previous recording. The song data recorded will be lost when
you turn off the power.
Demo
Press [DEMO] button to start or stop demo song
playing. The 3-digit LED will display “dE” , you can also
press [START/STOP] button to stop demo song playing.
0
5
25
75
95
100
AW_DD315_Manual_G08_150901
2015
9
2
15:38:18
10
Operation
Reverb
Record
Press [REVERB] button to enter reverb function. In this
menu, the digit on far left of LED will display letter “R”.
The two digits on the right will display current reverb level.
The button
can be used to adjust the
reverb level (0-3, not loop). This value will be auto-saved
after adjusted.
SELECT [+] / [ ]-
Prepare to Record
Select the desired song, drum kit, tempo, drum off
setting, and reverb settings.
Start Recording
Press the [REC] button, the light start flashing.
Press the [START/STOP] button or strike the pad, the
light stop flashing and the recording process starts.
Stop Recording
To stop recording, press the [START/STOP] button or
[REC] button. The record indicator will turn off. If the
memory is full, "FL" will appear on the display and
recording process
stops automatically.
Note: When you start recor ding, the vocal m etronome also
starts to count. But the sound of the vocal will not be record.
To stop the metronome, press the [CLICK] button.
Playback
Press the [PLAY
/STOP] button will start or stop playing
recorded song.
Note: When you record a new song, it will replace the
previous recording. The song data recorded will be lost when
you turn off the power.
Demo
Press [DEMO] button to start or stop demo song
playing. The 3-digit LED will display “dE” , you can also
press [START/STOP] button to stop demo song playing.
0
5
25
75
95
100
AW_DD315_Manual_G08_150901
2015
9
2
15:38:18
10
Operation
Reverb
Record
Press [REVERB] button to enter reverb function. In this
menu, the digit on far left of LED will display letter “R”.
The two digits on the right will display current reverb level.
The button
can be used to adjust the
reverb level (0-3, not loop). This value will be auto-saved
after adjusted.
SELECT [+] / [ ]-
Prepare to Record
Select the desired song, drum kit, tempo, drum off
setting, and reverb settings.
Start Recording
Press the [REC] button, the light start flashing.
Press the [START/STOP] button or strike the pad, the
light stop flashing and the recording process starts.
Stop Recording
To stop recording, press the [START/STOP] button or
[REC] button. The record indicator will turn off. If the
memory is full, "FL" will appear on the display and
recording process
stops automatically.
Note: When you start recor ding, the vocal m etronome also
starts to count. But the sound of the vocal will not be record.
To stop the metronome, press the [CLICK] button.
Playback
Press the [PLAY
/STOP] button will start or stop playing
recorded song.
Note: When you record a new song, it will replace the
previous recording. The song data recorded will be lost when
you turn off the power.
Demo
Press [DEMO] button to start or stop demo song
playing. The 3-digit LED will display “dE” , you can also
press [START/STOP] button to stop demo song playing.
0
5
25
75
95
100
AW_DD315_Manual_G08_150901
2015
9
2
15:38:18