Xeecom W193-R Owner's Manual

Summary of W193-R

  • Page 1

    W193-r wireless color rain gauge owner’s manual thank you for purchasing the new generation of color weather station. Designed and engineered with the state-of-art technology and components, this instrument will provide accurate and reliable measurement of rainfall readings as well as indoor/outdoor...

  • Page 2

    C/f toggle degree c & f unit light on/off turn on/off continuous backlight when adapter is connected installation setting up the main unit main power source: plug in the 6.0v adapter into the adapter socket at the back for basic operation and continuous backlight. Backup power: open the battery door...

  • Page 3

    Important: for best transmission distance, look for a location where the rain gauge can be placed 1 meter or more above ground level. - in an area not blocked on the top or sides, so rain can freely reach the rain gauge (for example, not under an overhang or too close to a building or fence) caution...

  • Page 4

    Press and hold [rain search] button again to search for remote rain gauge. Repeat above step until a valid rainfall reading appears. Searching mode display: “- - - -“ flashes on the rainfall display rf connection completed: valid rainfall reading appears rf connection failed: “- - - -“ stops flashin...

  • Page 5

    Press [c/f] button to select temperature unit between c/ f. Color bar graphs the color graphs are designed as an intuitive way to gauge the weather at a glance. The left color bar graph represents the respective indoor or outdoor temperature. As the temperature increases, the number of illuminated c...

  • Page 6

    Battery disposal replace only with the same or equivalent type recommended by the manufacturer. Please disposal of old, defective batteries in an environmentally friendly manner in accordance with the relevant legislation. Troubleshooting warning! The main unit & remote sensors (thermo sensor & rain...