XENO XHDAR Quick Setup Manual
I
Start Guide
DVR
XHDAR
AUDIO IN
AUDIO OUT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
2Amax
RS-485 RELAY
ALARM IN
+
C NC NO G 4 3 2 1
-
POWER
4
9
8
10
7
When all necessary cameras and monitors are setup in their permanent locations,
connect them to the DVR. Use the diagram in the Quick Start Guide and manual
for additional information.
When all connections have been made, connect the DVR to an appropriate power
supply. The DVR will boot up automatically.
Initial Setup
1. Make sure the cameras and the monitors are properly connected to the DVR.
2. The DVR should be placed in a dust and moisture free environment.
It must never be exposed to direct sunlight. Server room temperature is highly
recommended to reduce the chance of overheating. Overheating may cause
the DVR to become unstable.
3. During the boot process, the DVR should not be interrupted by pressing any
buttons on the front keypad, mouse, or remote controller. Do not unplug the
power adapter or turn the DVR off during the boot process.
A UPS (Uninterruptable Power Supply) is highly recommended to prevent
malfunctioning of the DVR during a power outage.
DVR Installation Safety Tips
No.
Buttons
Functions
1
LED Indicator
2
USB Port
Indicate System Status
Power, Record, Network
USB Port (Ver. 2.0) for Mouse Operation, Backup Device or
Firmware Update
4Ch/8ch DVR Front Panel
(1 HDD Case)
REAR PANEL
FRONT PANEL
INITIAL SETUP
The Main Menu (Setup Menu) system includes six (6) sub-menus: System,
Device, Record, Network, Backup, & Q. Setup. To access the Setup Menu
right-click anywhere on the screen and select 'Setup Menu'.
The DVR's default user ID and password are: admin/ no password.
Main Menu
1. Go to the System Menu and select SYSTEM INFO. Click on the pencil
icon next to the Date/ Time to enter edit mode.
2. Select the appropriate display format from the
[DATE/TIME FORMAT] drop down lists.
3. Select the appropriate date and local time in the [DATE/ TIME] section.
4. Select the appropriate time zone from the [TIME ZONE] drop down list.
5. If applicable, enable Daylight Savings mode.
Date and Time Setup
After adjusting the time and date for the first time, it is highly recommended to
format your Hard Disk Drive.
1. Go to the System Menu and select the HDD submenu.
2. Select the Check box next to the HDDs.
3. Click the [HDD Clear] button.
4. When the HDD formatting is complete, exit the main menu and reboot the DVR
to save all changes.
Formatting the Hard Drive Disk
4ch DVR Rear Panel
1
2
3
5
6
No.
I/O
Description
1
Video-In
2
Audio-In
3
Audio-Out
4
5
6
7
8
9
10
Camera inputs (Supports NTSC/PAL)
Audio Input Device (with Amplifier)
Audio Output Device (with Amplifier)
HD OUTPUT
Sensor Input
LAN Port
Alarm Output
USB Port
HD OUTPUT
Sensor Input
4ch : 1/10/100M
Alarm Output
RS-485 Port
PTZ Dome Camera or External Keyboard Controller connection
Power Input
USB 2.0 Port for Mouse Operation, Backup Device, or Firmware Update
4ch : 12 V/2A
8ch DVR Rear Panel(1 HDD Case)
8ch DVR Rear Panel(2 HDD Case)
16ch DVR Rear Panel
8/16ch : 1/10/100/1000M
8ch(1 HDD) : 12V/3A
8ch(2 HDD)/16ch : 12V/5A
HD OUTPUT
POWER
MADE IN KOREA
RISK OF ELECTRIC
SHOCK / DO NOT OPEN
PTZ
KBD
RELAY
ALARM IN
+
C NC NO G 4 3 2 1
-
+ -
5
4
9
8
10
1
2
3
7
6
RISK OF ELECTRIC SHOCK
DO NOT OPEN
1
2
3
5
6
4
7
9
8
10
1
2
3
5
6
4
7
9
8
10
5Amax
8ch/16ch DVR Front Panel (2 HDD Case)
The Quick Setup Menu offers an automatic recording and HDD calculator.
By entering your anticipated recording days, or the desired recording resolution, the
DVR will provide you with the estimated days recorded on your current HDD
space.
1. Select how many days you wish to record on your current storage. The system
will populate recommended recording resolution, frame-rate, and quality.
2. Select the desired recording specifications. The system will display the
number of days that will be recorded on your available storage.
Quick Setup
Note: To manually setup recording configurations, Quick Setup must be DISABLED.
If the "Use Quick Setup" option is enabled, the system will ignore all other
configurations set manually.
MADE IN KOREA
RISK OF ELECTRIC
SHOCK / DO NOT OPEN
HD OUTPUT
POWER
RELAY
ALARM IN
C NC NO G 4 3 2 1
PTZ
KBD
+ -
+ -
5Amax