Xenon Amplifier Manual - page 10
I
N
S
T
A
L
L
A
T
I
O
N
www.phoenixgold.com
10
X
E
N
O
N
B+
B–
R
B+
B–
R
D U A L P O W E R C O N N E C T I O N & M O U N T I N G
The X200.4 and X1200.1 have of dual power terminals. The power terminals are wired in parallel so one or both of
the inputs can be used for a normal installation. In most applications, one 4 gauge input will supply enough current
to the amplifier, but in some SPL situations the option of using dual 4 gauge inputs is available. The second terminal
can also be used to wire an external capacitor to the amplifier.
*BE SURE TO NOTE THE B+ AND B- CONNECTIONS ARE CORRECT WHEN USING BOTH POWER TERMINALS.
*DO NOT USE AUXILIARY POWER TERMINAL TO POWER AN ADDITIONAL AMPLIFIER!
T E R M I N A L C O V E R S
1. Mount the amplifier in a secure location, and strip the wiring for the amplifier's power and speaker terminals.
2. Remove the rubber terminal covers and feed the wiring through the provided holes.
3. Insert and attach the wiring to the power and speaker terminals on the amplifier.
4. Slide the terminal cover up the wire and snap it into place on the amplifier hiding all the connections.
Note: In the rare case where the wiring doesn't fit through the terminal cover holes, simply cut a small slit into the rubber for addition space.
MOUNT
MOUNT
MOUNT
MOUNT
2
3
4