Xenotronix NDX40 Series User Manual

Manual is about: Automatic Battery Charger

Summary of NDX40 Series

  • Page 1

    B r a n d model ndx40 series automatic battery charger user’s manual rev. 1.0 october 17, 2006 for sales, support and service phone: 407-331-4793 fax: 407-331-4708 website: www.Xenotronix.Com email: information@xenotronix.Com xenotronix/tli, inc. 2541 tracy road toledo, ohio 43619 phone: 419-666-698...

  • Page 2

    Warranty seller warrants that its products ("product(s)") will meet the specifications set forth in its catalog from time to time, unless the buyer is notified otherwise prior to delivery. Seller will, without charge, repair or provide a replacement for any of the products which prove to be defectiv...

  • Page 3

    Table of contents model ndx40 automatic battery charger – user’s manual important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 operating...

  • Page 4

    Ndx40 user’s manual xenotronix/tli 1 important safety instructions save these instructions - this manual contains important safety and operating instructions for model hpx30 battery chargers. Before using the battery charger, please read all instructions and cautionary markings on the battery charge...

  • Page 5

    Ndx40 user’s manual xenotronix/tli 2 introduction the model ndx40 is designed with the best interests of your battery in mind. It is a high reliability battery charger designed for recharging nickel-cadmium (nicd) and nickel-metal-hydride (nimh) batteries. It can charge from 1 to 12 cells at current...

  • Page 6

    Ndx40 user’s manual xenotronix/tli 3 if batteries are hot or cold, allow them to adjust to room temperature before attempting to charge them. The standard output cable is black spt-1 zipcord (parallel cord), size 18 awg, 2- conductor, 3-feet long and has a molded on barrel plug connector with a mold...

  • Page 7

    Ndx40 user’s manual xenotronix/tli 4 charger does not switch into charge mode, this indicates that your battery is probably damaged. You can attempt to recover the battery by leaving your battery attached to the charger. Eventually, the charger may switch into charge mode. Damaged batteries may be p...

  • Page 8

    Ndx40 user’s manual xenotronix/tli 5 battery charger specifications general conditions: 25 °c (77 °f) quick charge rate 2c (c/.5) 1c (c/1) .5c (c/2) .25c (c/4) minimum charge current 0.5 a / 500 ma 0.5 a / 500 ma 0.5 a / 500 ma 0.5 a / 500 ma maximum charge current 2.5 a / 2500 ma 2.5 a / 2500 ma 2....

  • Page 9

    Ndx40 user’s manual xenotronix/tli 6 dimensions 11 5 charging ready front view back view top view.