English user manual this manual is available in english, german, french, spanish, italian, russian, polish, dutch, finnish, swedish, danish, portuguese, greek, japanese and chinese. There may also be more current versions of this document. Download them by going to the appropriate product page at: w...
English xenyx 1002fx/1202fx user manual 2 * terminals marked with this symbol carry electrical current of suffi cient magnitude to constitute risk of electric shock. Use only high-quality commercially-available speaker cables with ¼" ts plugs pre-installed. All other installation or modifi cation sh...
English xenyx 1002fx/1202fx user manual 3 introduction 1. The behringer xenyx mixing console offers you premium- quality microphone preamplifiers with optional phantom power supply, balanced line inputs and the ability to connect external effects processors. Because of its extensive and carefully th...
English xenyx 1002fx/1202fx user manual 4 frequency response correction using the equalizers found in each channel strip, you can simply, quickly and effectively adjust the way a signal sounds. Signal distribution: • individual, processed signals from the channel strips are compiled on busses and ar...
English xenyx 1002fx/1202fx user manual 5 not be located in your vicinity, you may directly contact one of our subsidiaries. Corresponding contact information is included in the original equipment packaging (global contact information/european contact information). Should your country not be listed,...
English xenyx 1002fx/1202fx user manual 6 the upper (high) and the lower band (low) are shelving filters that increase or decrease all frequencies above or below their cut-off frequency. The cut-off frequencies of the upper and lower band are 12 khz and 80 hz respectively. The mid band is configured...
English xenyx 1002fx/1202fx user manual 7 line in each stereo channel has two balanced line level inputs on ¼" connectors for left and right channels. If only the connector marked “l” (left) is used, the channel operates in mono. The stereo channels are designed to handle typical line level signals....
English xenyx 1002fx/1202fx user manual 8 recording: for mastering, using a stereo compressor such as the composer pro-xl mdx2600 can be recommended. Use it to custom-tailor the dynamic characteristics of your signal to the dynamic range of the recording equipment you are using. The signal is in thi...
English xenyx 1002fx/1202fx user manual 9 phones/control room use the phones/control room control to adjust the signal level of the control room and phones outputs. Cd/tape to mix when the cd/tape to mix switch is pressed, the cd/tape input is assigned to the main mix providing an additional input f...
English xenyx 1002fx/1202fx user manual 10 applications 3. Recording studio 3.1 fig. 3.1: the 1002fx in a recording studio md recorder behringer hps3000 headphones microphone behringer b-2 pro active monitors behringer truth b2030a cd player electric guitar modeling amp behringer v-amp2 behringer xe...
English xenyx 1002fx/1202fx user manual 11 even though most of the tasks in a studio can nowadays be accomplished using a computer, a mixing console remains an unavoidable piece of equipment that lets you effectively manage audio inputs and outputs: microphone signals need to be pre-amplified prior ...
English xenyx 1002fx/1202fx user manual 12 live sound 3.2 fig. 3.2: live application of the 1202fx microphones behringer xm1800s behringer hps3000 headphones cd player md recorder drum computer bass amplifier ultrabass bx3000t electric guitar bass guitar behringer v-ampire lx112 ultragraph pro fbq31...
English xenyx 1002fx/1202fx user manual 13 this illustration shows a typical arrangement for a live setup. Two vocal microphones and the line outputs of a guitar and a bass amplifier are connected to the mono channels of the 1202fx. A keyboard and a drum computer are connected to the stereo channels...
English xenyx 1002fx/1202fx user manual 14 strain relief clamp sleeve ring tip sleeve ground/shield for connection of balanced and unbalanced plugs, ring and sleeve have to be bridged at the stereo plug. Balanced ¼" trs connector ring cold (-ve) tip hot (+ve) fig. 4.3: ¼"stereo plug fig. 4.4: stereo...
English xenyx 1002fx/1202fx user manual 15 audio outputs fx send type ¼" trs connector, unbalanced impedance approx. 120 Ω max. Output level +22 dbu main outputs type ¼" trs connector, unbalanced impedance approx. 120 Ω max. Output level +22 dbu control room outputs type ¼" trs connector, unbalanced...
English xenyx 1002fx/1202fx user manual 16 limited warranty en warranty § 1 this limited warranty is valid only if you purchased the product from a behringer [1] authorized dealer in the country of purchase. A list of authorized dealers can be found on behringer’s website www. Behringer. Com under “...
English xenyx 1002fx/1202fx user manual 17 legal disclaimer claim for damage § 6 subject only to the operation of mandatory applicable local laws, behringer shall have no liability to the buyer under this warranty for any consequential or indirect loss or damage of any kind. In no event shall the li...
English xenyx 1002fx/1202fx user manual 18 federal communications commission compliance information responsible party name: behringer usa, inc. Address: 18912 north creek parkway, suite 200 bothell, wa 98011, usa phone/fax no.: phone: +1 425 672 0816 fax: +1 425 673 7647 hereby declares that the pro...
English xenyx 1002fx/1202fx user manual 19.
English this manual is available in english, german, french, spanish, italian, russian, polish, dutch, finnish, swedish, danish, portuguese, greek, japanese and chinese. There may also be more current versions of this document. Download them by going to the appropriate product page at: www.Behringer...
