Summary of XL1600
Page 1
Xeny x xl1600/xl2400/xl3200 user manual a50-77230-08001.
Page 2
Xenyx xl1600/xl2400/xl3200 2 important safety instructions this symbol, wherever it appears, alerts you to the * presence of uninsulated dangerous voltage inside the enclosure - voltage that may be suffi cient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important !...
Page 3
Xenyx xl1600/xl2400/xl3200 3 foreword dear customer, welcome to the team of behringer users, and thank you very much for expressing your confi- dence in us by purchasing this device. Writing this foreword for you gives me great plea- sure, because it repre- sents the culmination of many months of ha...
Page 4
Xenyx xl1600/xl2400/xl3200 introduction 4 introduction 1. Congratulations! By purchasing one of the xenyx mixing con- soles you have acquired a state-of-the-art audio mixer that sets new standards. Right from the very start it has been our goal to design a revolutionary unit that can be used for a g...
Page 5
Xenyx xl1600/xl2400/xl3200 quick start 5 quick start 2. Hook-up example (inputs and inserts) 2.1 input wiring fig. 2.1:.
Page 6
Xenyx xl1600/xl2400/xl3200 quick start 6 hook-up example (outputs) 2.2 output wiring fig. 2.2:.
Page 7
Xenyx xl1600/xl2400/xl3200 installation 7 installation 3. Rack mounting (xl1600 only) 3.1 the packaging of your xl1600 contains two 19" rack mounts that can be fastened to the side panels of the console. Before you can attach the rack mounts to the mixing console, you need to remove the screws holdi...
Page 8
Xenyx xl1600/xl2400/xl3200 connectors 8 connectors 4. Let's begin with the rear panel where the majority of inputs and outputs are located. Power supply 4.1 iec receptacle the mains connection is a standard iec re- ceptacle. An appropri- ate power cord is sup- plied with the unit. Fuse holder before...
Page 9
Xenyx xl1600/xl2400/xl3200 connectors 9 stereo inputs 4.3 line l (mono), line r the stereo channels consist of two line inputs (¼" jacks), one for the left and one for the right channel. The inputs are balanced (trs connectors), but it is also possible to connect to unbalanced plugs (ts con- nectors...
Page 10
Xenyx xl1600/xl2400/xl3200 control elements 10 control elements 5. This chapter describes the various control elements of your mixing console. Each control and switch is explained in full detail. Mono channels 5.1 +48 v this control led lights up as long as the phantom power is switched on. The swit...
Page 11
Xenyx xl1600/xl2400/xl3200 control elements 11 channel fader, pan control, mute control, etc. 5.1.2 pan the pan control determines the position of the channel signal in the stereo mix as well as the subgroup to which the channel signal is routed. Mute the mute switch mutes the channel. This means th...
Page 12
Xenyx xl1600/xl2400/xl3200 control elements 12 main section 5.3 main a section 5.3.1 bal(ance) the bal(ance) control adjusts the mix of the left and right output signal before both signals are routed to the main a output. This way the left and right volume level of the mixer sum can individually be ...
Page 13
Xenyx xl1600/xl2400/xl3200 control elements 13 further functions of the master section 5.6 talkback 5.6.1 the talkback function of the xenyx allows you to communicate with people on stage. The talkback signal can be routed to the different bus outputs. Mic here you can plug in the microphone for tal...
Page 14
Xenyx xl1600/xl2400/xl3200 modifications 14 solo press the solo switch to listen in on the effect signal on the head- phones/speakers as well as see it on the monitor meter 1/2. The corresponding led lights up when the solo function is activated. Fx return the fx return fader adjusts the volume leve...
Page 15
Xenyx xl1600/xl2400/xl3200 specifications 15 specifications 7. Mono inputs microphone inputs (xenyx mic preamp) type xlr connector, electronically balanced, discrete input circuit rf rejection filters mic e.I.N. 1 (20 hz - 20 khz) @ 0 Ω source resistance -127 db / 129.7 db a-weighted @ 50 Ω source r...
Page 16
Xenyx xl1600/xl2400/xl3200 specifications 16.
Page 17
Xenyx xl1600/xl2400/xl3200 warranty 17 technical specifications and appearance are subject to change without notice. The information contained herein is correct at the time of printing. Behringer accepts no liability for any loss which may be suffered by any person who relies either wholly or in par...
Page 18
Federal communications 9. Commission compliance information responsible party name: behringer usa, inc. Address: 18912 north creek parkway, suite 200 bothell, wa 98011, usa phone/fax no.: phone: +1 425 672 0816 fax: +1 425 673 7647 hereby declares that the product xenyx xl1600 xenyx xl2400 xenyx xl3...