Xerox 4213 User Manual - 4213 Laser Printer

4213 Laser Printer

Programmer Reference Update

LJ2D Paper Source commands and the high capacity feeder

When the optional high capacity feeder is installed and selected

as a paper source through the user interface, the Paper Source

commands as described in chapter 3 of the Xerox 4213 Laser

Printer Programmer Reference may select a different paper tray.

The following table illustrates these differences:

Table 1.

Paper source values with high capcity feeder

selected

Tray sequence

(through user

interface)

Paper source command effect

HCF

The high capacity feeder is addressed as the default tray and is

accessed by the 

E 

&l0H command.  All the other paper tray

source commands work as described in the 4213 Programmer

Reference.

HCF-TRAY1

The high capacity feeder is addressed as both the default tray

and tray 1; therefore, the HCF is accessed by either the 

E

&l0H or the 

E 

&l1H command.  The paper tray 2 command (

E

&l4H) works as described in the 4213 Programmer Reference.

HCF-TRAY2

The high capacity feeder is addressed as both the default tray

and tray 2; therefore, the HCF is accessed by either the 

E

&l0H or the 

E 

&l4H command.  The paper tray 1 command (

E

&l1H) works as described in the 4213 Programmer Reference.

HCF-TRAY1-2

The high capacity feeder is addressed as the default tray no

matter which paper source command (

E 

&l0H, 

E 

&l1H, or 

E

&l4H) is sent.

Font selection

If “best fit” does not give the font you expect, choose the font

by font ID or define the correct criteria for the desired font.

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE UPDATE  

1