Xerox 6204 Wide Format Solution User Manual - page 70
of
302
Copy
Xerox 6204 Wide Format Solution
User Guide
3-62
Stopping Scanning & Copying
Stopping a Scan
Follow the procedure below to stop the scanning of a document.
1.
Press the
Scanning will stop immediately.
Note
If you press the
press will have no effect. If this happens, refer to Stopping a Copy Job (below) to stop the job.
2.
If the original is still in the scanner when scanning stops, a [Document Jam] message will display.
Clear the document jam and remove the document by performing the steps listed on the touch
screen.