Xerox 82 Series User Manual - page 19
Other manuals for 82 Series:
Hints And Tips Manual
Manual is about: Wide Format Printer Unwinder / Winder
of
44
3-5
3.2.2.2 On a ValueJet 1604
Parts and Tools needed
No
Description
Quantity
1 Right
bracket
1
2
Left bracket
1
3
Self locking bolt M6x16
8
4
Tooth lock washer M6
1
5
Hexagon wrench 5 mm
1
Instructions
Notes
Before installing the winding system on a ValueJet, it is recommended to loosen screws fixing the printer
from its stand and push it to the rear and tighten the bolts again. This to be sure that the machine is well
positioned.
Step 1 :
Screw the self locking bolts half way in.
Step 2 :
Hook the left and right bracket over the four screws and pull.
Step 3 :
Tighten the bolts of the right bracket.