- DL manuals
- Xerox
- Printer
- 8254E
- User Manual
Xerox 8254E User Manual
Summary of 8254E
Page 1
1 september 2008 701p49052 8264e color wide format printer 100kg unwinder / winder user guide.
Page 3: Table of Contents
100kg unwinder / winder user guide i table of contents 1 safety and warning label information.................................................................. 1 1.1 safety considerations...................................................................................... 1 1.2 warning labels ........
Page 4
Ii 100kg unwinder / winder user guide this page has been intentionally left blank..
Page 5
100kg unwinder / winder user guide 1 1 safety and warning label information 1.1 safety considerations various procedures throughout this user guide may list 2 levels of safety indicators that need to be adhered to during the performance of a procedure. These indicators take into account the level of...
Page 6
1 safety and warning label information 2 100kg unwinder / winder user guide 1.2.1 warning label locations and types the figures below indicate the locations of the warning labels. 1 1 figure 1. Front warning label locations 1 1 figure 2. Rear warning label locations no. Types of warning label 1.
Page 7
1 safety and warning label information 100kg unwinder / winder user guide 3 1.3 operating instructions labels this section explains the different types of operating instructions labels and where they are located. The operating instruction labels are used in this product to briefly explain the operat...
Page 8
1 safety and warning label information 4 100kg unwinder / winder user guide this page has been intentionally left blank..
Page 9
100kg unwinder / winder user guide 5 2 unwinder / winder operation 2.1 location of major components this section will explain the names and functions of the major components of the unwinder / winder. 2.1.1 unwinder components 1 1 2 3 figure 4. Location of major components (unwinder) no. Part name fu...
Page 10
2 unwinder / winder operation 6 100kg unwinder / winder user guide 2.1.2 winder components 1 1 3 2 4 figure 5. Location of major components (winder) no. Part name function 1 winder spindles rolls in the media after printing 2 winder tension bar roller used to guide the media after printing to the ro...
Page 11
2 unwinder / winder operation 100kg unwinder / winder user guide 7 2.1.3 unwinder control panel the unwinder control panel is used to set the operating mode and to display the status of the unwinder. 2 5 3 1 4 figure 6. Unwinder control panel 2.1.3.1 switches / button no. Part name function 1 automa...
Page 12
2 unwinder / winder operation 8 100kg unwinder / winder user guide 2.1.4 winder control panel the winder control panel is used to set the operating mode and to display the status of the winder. 4 3 2 1 figure 7. Winder control panel 2.1.4.1 switches no. Part name function 1 automatic operation switc...
Page 13
2 unwinder / winder operation 100kg unwinder / winder user guide 9 2.2 connecting the power cable this section describes the procedure for connecting the power cable. Z do not use a damaged power cable. If the power cable is damaged, contact your local xerox customer service representative for a rep...
Page 14
2 unwinder / winder operation 10 100kg unwinder / winder user guide 2.3 turning the power on and off the following section provides procedures for setting the unwinder / winder power on and off. 2.3.1 turning the power on turn the power on by following the instructions below. 1. Set the unwinder / w...
Page 15
2 unwinder / winder operation 100kg unwinder / winder user guide 11 2.4 loading roll media onto the unwinder the following section describes how to load roll media on the unwinder. Media core size 3 inch：maximum media width 1625mm, minimum media width 1000mm, media outside diameter less than 250mm, ...
Page 16
2 unwinder / winder operation 12 100kg unwinder / winder user guide 4. Place the roll media on top of the rear rail. 1 2 figure 14. Install roll media no. Part name 1 rear rail 2 roll media 5. Set the roll media on the left unwinder spindle and tighten the left unwinder spindle locking handle. 1 2 3...
Page 17
2 unwinder / winder operation 100kg unwinder / winder user guide 13 6. Set the roll media on the right unwinder spindle and tighten the right spindle locking handle. 3 2 1 figure 16. Install roll media no. Part name 1 right unwinder spindle 2 roll media 3 right spindle locking handle 7. Loosen the l...
Page 18
2 unwinder / winder operation 14 100kg unwinder / winder user guide 8. Set the printer power switch to on. After an short initialization period the printer control panel will display “no media”. 9. Raise the media set lever. The printer control panel will display “please set media”. 1 figure 18. Ins...
Page 19
2 unwinder / winder operation 100kg unwinder / winder user guide 15 11. Set the unwinder automatic operation switch as described below: ・ if the paper will be printed on the outside of the roll media: outside roll ・ if the paper will be printed on the inside of the roll media: inside roll figure 20....
Page 20
2 unwinder / winder operation 16 100kg unwinder / winder user guide 13. Insert the roll media into the tension roller, and then into the rear printer platen. Media can be inserted either with the print surface on the outside (figure 22) or with the print surface on the inside (figure 23). A. When us...
Page 21
2 unwinder / winder operation 100kg unwinder / winder user guide 17 b. When using a roll paper where the print surface is on the inside. Damage and problems that occur because of the use of roll media where the print surface is on the inside are not covered by the warranty. 1 2 3 2 1 3 figure 23. In...
Page 22
2 unwinder / winder operation 18 100kg unwinder / winder user guide 14. Pull about 1 meter of roll media out from the front printer plate. 1 2 figure 24. Install roll media no. Part name 1 roll media 2 front printer platen 15. Set the manual operation switch to “reversal” to roll in the media slight...
Page 23
2 unwinder / winder operation 100kg unwinder / winder user guide 19 1 2 1 figure 26. Install roll media no. Part name 1 roll media 2 media setting guide 16. Lower the media set lever. 1 figure 27. Lower media set lever no. Part name 1 media set lever.
Page 24
2 unwinder / winder operation 20 100kg unwinder / winder user guide 17 push the “initialize” button on the unwinder control panel. Figure 28. Push initialize 18 close the printer front cover. 1 figure 29. Close the printer front cover no. Part name 1 printer front cover.
Page 25
2 unwinder / winder operation 100kg unwinder / winder user guide 21 2.5 operating the winder this section provides instructions for using the unwinder / winder. 1. Set a media core on the winder. Ensure that the size of the core is that same size as the media roll core. ● when using the winder, be s...
Page 26
2 unwinder / winder operation 22 100kg unwinder / winder user guide 4. Attached the tip of the roll media to the media core on the winder spindles. Ensure that the media parallel to the core. Secure the tip of the media to the core with tape. 2 1 3 figure 31. Attach the media to the core no. Part na...
Page 27
2 unwinder / winder operation 100kg unwinder / winder user guide 23 2.6 removing a printed media core from the winder this section will explain the procedure to remove the media core from the winder. 1. Set the winder automatic operation switch to off. 2. If the media core being removed is partially...
Page 28
2 unwinder / winder operation 24 100kg unwinder / winder user guide this page has been intentionally left blank..
Page 30
26 100kg unwinder / winder user guide prepared by: xerox corporation global knowledge and language services 800 phillips road, bldg. 0218-01a webster, new york 14580-9791 usa ©2008 by xerox corporation. All rights reserved. Copyright protection claimed includes all forms and matters of copyrightable...