Xerox Color C75 Press Quick Start Manual - page 15

4

Paper and other media

Loading paper in trays 1, 2, and 3

Note

A paper jam may occur if a tray is opened while it is being used to feed stock.

1. Select the appropriate paper stock for your print job.

2. Pull out the tray slowly until it stops.

3. Open the ream of paper with the seam side facing up.

4. Fan the sheets before loading them into the tray.

5. Load and align the edge of the paper against the left edge of the tray.

Paper can be loaded either in the LEF/portrait or SEF/landscape direction.

6. Adjust the paper guides by pressing in the guide release and carefully moving the

Edge Guide until it lightly touches the edge of the material in the tray.

Do not load materials above the MAX line located on the rear Edge Guide.

7. Gently push in the tray until it comes to a stop.

If enabled by your System Administrator, the Paper Tray settings screen may be

displayed on the UI.

4-1

Xerox

®

 Color C75 Press

Quick Start Guide