1. DL manuals
  2. Xerox
  3. All in One Printer
  4. CUSTOMER TIPS 7425/7428/7435
  5. Reference Manual

Xerox CUSTOMER TIPS 7425/7428/7435 Reference Manual

Manual is about: PDL Reference Guide

Summary of CUSTOMER TIPS 7425/7428/7435

  • Page 1

    Xerox multifunction devices customer tips pdl reference guide for the workcentre 7425/7428/7435 dc09cc0453 june 10, 2009 …for the user accessing extended features overview this document applies to the this document enables you to access the extended features of the workcentre 7425/7428/7435 in envir...

  • Page 2: Pcl

    Pcl this workcentre supports pcl5e and pcl xl emulations that enable the features listed in the following table. Feature description job name the value for job name is stored for printing on the banner page. Custom paper size customer designated paper size on which to print a job. Media size the siz...

  • Page 3

    Pcl/pjl implementation the following table contains the pcl feature commands and shows the syntax required to use the feature. After the table are examples of how to use these commands and examples of a pcl file. Feature implementation values job name @pjl set jobname = " jobname-string " where jobn...

  • Page 4

    Feature implementation values jpost = postcard (100 x 148mm) jpostd = postcard (148 x 200mm) postcard = postcard (4 x 6") 50x70 = 5 x 7" tyoukei3 = envelope (120 x 235mm) com10 = no. 10 envelope (4.1 x 9.5”) monarch = monarch envelope (3.9 x 7.5”) dl = dl envelope (110 x 220mm) c5 = c5 envelope (162...

  • Page 5

    Feature implementation values media source @pjl set mediasource = value where value is one of the following: tray1 : feed from paper tray1 tray2 : tray2 tray3 : tray3 tray4 : tray4 tray5 : tray5 (bypass) &l int h where int is one of the following: 0 : feed paper from default tray 4 : tray1 1 : tray2...

  • Page 6

    Feature implementation values punch @pjl set punch = value1 @pjl set jobattr = ”@pnhn = value2 ” where value1 is one of the following: top right left bottom none where value2 is one of the following: two: 2 holes three: 3 holes four: 4 holes folding @pjl set jobattr = "@fold = value1" where value1 i...

  • Page 7

    Feature implementation values &l int x where int is: 1-999 @pjl set duplex = value1 where value1 is one of the following: off: simplex simplex &l int s where int is one of the following: 0: simplex @pjl set duplex = value1 @pjl set binding = value2 where value1 is one of the following: on: duplex wh...

  • Page 8

    Feature implementation values job based accounting or auditron @pjl set jobattr = "@joau = string1 " @pjl set jobattr = "@joap = string2 " @pjl set jobattr = "@daid = string3 " where string1 is a maximum of 32 characters (ascii characters in the range 20h - 7eh only) as job owner (capital character ...

  • Page 9

    Sample pjl headers this section contains examples of these commands in use. Example 1 simple print %-12345x@pjl job mode=printer @pjl comment beginning pcl job @pjl set outbin=maintray @pjl set qty=1 @pjl set resolution=600 @pjl set jobattr="@joau=john" example 2 finishing options (stapling) %-12345...

  • Page 10

    Example 6 finishing options (bi-folding(single page)) %-12345x@pjl job mode=printer @pjl set outbin=booklettray @pjl set finish=none @pjl set staple=none @pjl set jobattr="@fold=bifoldinside" @pjl set jobattr="@bksg=left" example 7 proof print %-12345x@pjl job mode=printer @pjl set hold=proof @pjl s...

  • Page 11

    Pcl/pjl feature dependencies/caveats all pjl commands must be in the first 2,500 bytes of the job. To combine printer escape commands (not including pjl commands): - the first two characters after the must be the same. - all alpha characters must be lowercase, except the final terminating character....

  • Page 12

    Dc09cc0453 font name pcl escape command courier italic ((s1p12v1s0b4099t courier bold italic ((s1p12v1s3b4099t garamond antiqua ((s1p12v0s0b4197t garamond halbfett ((s1p12v0s3b4197t garamond kursiv ((s1p12v1s0b4197t garamond kursiv halbfett ((s1p12v1s1b4197t line printer (roman-8) (8u(s0p16.67h8.5v0...

  • Page 13

    Font name pcl escape command itc bookman demi ((s1p12v0s2b24623t itc bookman demi italic ((s1p12v1s2b24623t helvetica narrow ((s1p12v4s0b24580t helvetica narrow oblique ((s1p12v5s0b24580t helvetica narrow bold ((s1p12v4s3b24580t helvetica narrow bold oblique ((s1p12v5s3b24580t new century schoolbook...

  • Page 14: Postscript

    Dc09cc0453 customer support page 14 postscript this workcentre supports ps 3 commands that enable the features listed in the following table. Feature description media size this command specifies the size of media on which to print the job. Media direction this command specifies the edge of the inpu...

  • Page 15

    Dc09cc0453 customer support page 15 feature description punch this command indicates hole punches for a print job on a device with hole punch capability. Booklet this command enables you to print documents as small booklets. If available on your printer, you can also have your job folded or stapled....

  • Page 16

    Dc09cc0453 customer support page 16 postscript implementation the following table contains the postscript commands and shows the syntax required to use the feature. Following the table are examples of commands and a ps file. For more details about postscript commands, refer to the postscript languag...

  • Page 17

    Dc09cc0453 customer support page 17 feature implementation values [649 918] = c4 envelope (229 x 324mm) [459 649] = c5 envelope (162 x 229mm) media direction int >> setpagedevice where int is one of the following: 0 = short edge; top of canonical page 1 = long edge; right side of canonical page 2 = ...

  • Page 18

    Dc09cc0453 customer support page 18 feature implementation values user 3 = custom 3 user 4 = custom 4 user 5 = custom 5 holed = hole punched letterhead = letterhead preprinted = pre-printed other = other thin = lightweight thick1 = heavyweight (hw) (106 - 169g/m2) thick1 side2 = hw reload (106 - 169...

  • Page 19

    Dc09cc0453 customer support page 19 feature implementation values thick2 side2[b] = extra hw (x-hw) b reload thick2 side2[c] = extra hw (x-hw) c reload thick2 side2[s] = extra hw (x-hw) s reload media type string )>> setpagedevice where string is any value or null*. (mediatype will not affect tray s...

  • Page 20

    Dc09cc0453 customer support page 20 feature implementation values halftone screen selection /postrenderingenhancedetails int >> >> setpagedevice where int is one of the following: 0 = for text, graphics screen 1 = for photograph screen 2 = most suitable screen* output location string )>> setpagedevi...

  • Page 21

    Dc09cc0453 customer support page 21 feature implementation values punch (w/ c- finisher) int1 /punchdetails /position int2 /numholes int3 >> >> setpagedevice where int1 is one of the following: 0 = do not punch* 3 = do punch by set unit. Where int2 is one of the following: 0 = topside 1 = bottom sid...

  • Page 22

    Dc09cc0453 customer support page 22 feature implementation values process color model name >> setpagedevice where name is one of the following: /devicegray /devicergb (with separations true) /devicecmyk /devicecmy (with separations true) /devicergbk (with separations true) rgb correction /type 26 /r...

  • Page 23

    Dc09cc0453 customer support page 23 feature implementation values brightness /type 26 /brightness int >> >> setpagedevice where int is one of the following: 5 = bright (+5) 4 = bright (+4) 3 = bright (+3) 2 = bright (+2) 0 = normal* -1 = dark (-1) -2 = dark (-2) -3 = dark (-3) -4 = dark (-4) -5 = da...

  • Page 24

    Dc09cc0453 customer support page 24 sample postscript headers example 1 header for simple print %!Ps example 2 header for finishing (letter paper, duplex, 10 copies with collation, stapling with left-upper single and finisher tray for output bin) %!Ps > setpagedevice >setpagedevice >setpagedevice >s...

  • Page 25

    Dc09cc0453 customer support page 25 postscript fonts the following postscript fonts are resident with adobe interpreter. Font name postscript font name albertus /albertusmt albertus italic /albertusmt-italic albertus light /albertusmt-light antique olive roman /antiqueolive-roman antique olive itali...

  • Page 26

    Dc09cc0453 customer support page 26 font name postscript font name gill sans /gillsans gill sans italic /gillsans-italic gill sans bold /gillsans-bold gill sans bold italic /gillsans-bolditalic gill sans light /gillsans-light gill sans light italic /gillsans-lightitalic gill sans extra bold /gillsan...

  • Page 27

    Dc09cc0453 customer support page 27 font name postscript font name new century schoolbook bold /newcenturyschlbk-bold new century schoolbook bold italic /newcenturyschlbk-bolditalic newyork /newyork ocr-b letterpress m /ocrbletm optima roman /optima optima italic /optima-italic optima bold /optima-b...

  • Page 28: Additional Information

    Additional information xerox customer support welcomes feedback on all documentation - send feedback via e-mail to: usa.Dssc.Doc.Feedback@mc.Usa.Xerox.Com . You can reach xerox customer support at 1-800-821-2797 (usa), tty 1-800-855-2880 or at http://www.Xerox.Com . Other tips about xerox multifunct...