Xerox DocuColor 5000 Administrator's Manual - page 45
Other manuals for DocuColor 5000:
Information Bulletin, Administrator's Manual, Getting Started, User Manual, Recommended Materials List, Information Bulletin
of
108
DocuColor 5000 Administrator Guide
2-15
2. System Settings
Fault Clearance
Use the Auto Resume After Fault Clearance feature to restart a
job automatically after a fault is cleared and a job received over
the network is waiting for user instruction.
1.
From the System tab of the System Settings window, select
the checkbox to the left of Fault Clearance.
2.
Use the up or down arrow buttons to change the time. The
range available is 1-10 minutes.
NOTE: The system default time is two minutes.
3.
Select
OK
to save your changes and close the System
Settings window.