Xerox DocuColor 5000 User Manual - page 85
DocuColor 5000 User Guide
4-9
4. Accessories
Identifying the parts
Control panel
Item
Number
Name
Function
1
Ready light
The Ready light blinks during initialization and is constant when the HCS is in
use or in standby mode.
2
Sample set
button
Press to have the HCS deliver the next collated set to the top tray.
3
Unload
button
Press once to lower the Stacker Tray and unlock the front door. If pressed
while running a job, all sheets in the paper path are delivered before the
Stacker Tray starts to lower.
4
Unload light
Illuminates when the Stacker Tray has reached the down position and the
front door can be opened.
5
Wait light
Blinks when the Stacker Tray is moving up or down.
6
Fault code
display
Displays a code when a fault occurs in the stacker. Refer to the HCS fault
code table located in the Problem Solving section of this chapter.
7
Top tray jam
area
Blinks when there is a jam.
8
Bypass jam
area
Blinks when there is a jam.
9
Stacker tray
jam area
Blinks when there is a jam or the door is open.
Not
applicable
Keypad
(not shown)
Used by the service representative for diagnostics. The keypad is located on
the front right of the control panel.